<![CDATA[SoliForum - 3D Printing Community — New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/topic/9458/new-da-vinci-v1-gives-0040-error-on-first-demo-print-what-now/ Sat, 24 Jan 2015 18:32:52 +0000 PunBB <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81331/#p81331 owenransen wrote:

Before trying my own STL files I thought I'd get it to do a demo. It stopped and gave me a 0040 (cannot read\write SD card) error.

So here is the solution in pictures, see three attached images. Or maybe even easier see this blog http://owenransen.blogspot.it/2015/01/3 … ne-eh.html:

]]> Sat, 24 Jan 2015 18:32:52 +0000 https://www.soliforum.com/post/81331/#p81331 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81328/#p81328 loncaric wrote:

Also, it says they'll respond within three days but they've never taken more than an hour to email me back.

If you need to exchange parts, that's another story.  That takes a while.

Yes, then replied within a few hours.

]]> Sat, 24 Jan 2015 18:28:49 +0000 https://www.soliforum.com/post/81328/#p81328 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81300/#p81300 Also, it says they'll respond within three days but they've never taken more than an hour to email me back.

If you need to exchange parts, that's another story.  That takes a while.

]]> Sat, 24 Jan 2015 16:51:13 +0000 https://www.soliforum.com/post/81300/#p81300 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81272/#p81272 carl_m1968 wrote:

As I posted to your post in the other thread, see this thread.

The issue is the SD card. It is not plugged, fully seated, or worse faulty.

Yes, it felt a bit loose. I've taken it out and pushed it back in again. Now I'll try the demo again...

]]> Sat, 24 Jan 2015 10:46:02 +0000 https://www.soliforum.com/post/81272/#p81272 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81271/#p81271 rockosmodlife wrote:

Literally switch off and on the main switch on the back.

Thanks, I was not sure if that would damage something.

I'll try the demo again now, after reseating the SDA card...

]]> Sat, 24 Jan 2015 10:44:57 +0000 https://www.soliforum.com/post/81271/#p81271 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81266/#p81266 As I posted to your post in the other thread, see this thread.

http://www.soliforum.com/topic/8473/err … -vinci-10/

The issue is the SD card. It is not plugged, fully seated, or worse faulty.

]]> Sat, 24 Jan 2015 09:19:22 +0000 https://www.soliforum.com/post/81266/#p81266 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81265/#p81265 Literally switch off and on the main switch on the back.

]]> Sat, 24 Jan 2015 09:18:43 +0000 https://www.soliforum.com/post/81265/#p81265 <![CDATA[New Da Vinci V1 gives 0040 error on first demo print - what now?]]> https://www.soliforum.com/post/81258/#p81258 Before trying my own STL files I thought I'd get it to do a demo. It stopped and gave me a 0040 (cannot read\write SD card) error. XYZprinting said they'll reply to my support request within 3 days. 3 days!

Anyone know about this error?

And anyone know how I should reset the machine... It os flashing and beeping in the middle of a stopped print. How do I switch it off safely?

]]> Sat, 24 Jan 2015 08:55:58 +0000 https://www.soliforum.com/post/81258/#p81258