As for your issue, I can't imagine what would be causing your extrusion to not modify properly, perhaps you're manually setting something in g-code?

in the FFF settings under the Extruder tab there is a setting for the extrusion multiplier, is that what youre after?

No,  *******EEPROM******* settings. 

See here:
http://www.google.com/url?sa=i&rct= … 1468203463

worldburger wrote:

S3D has been perfect so far.  The only thing I can't figure out is how to change the EEPROM settings without manually sending G-code.

by this do you mean that once you have gone ahead and hit the "Begin Printing Over USB" button within S3D, you can no longer change any settings within the print?  say, like you mentioned in your first post the Z-Axis offset in the FFF settings?

No, what I mean is this: I want to change the steps/mm for the extruder to calibrate extrusion.  This doesn't seem possible in S3D so I end up using RH.  If someone knows how to change EEPROM settings, I'd be curious to hear how.

Any luck getting auto bed leveling working in S3D?

You need to make sure you have the "G29" code in your starting G-Code. That's what triggers the auto leveling process.

S3D has been perfect so far.  The only thing I can't figure out is how to change the EEPROM settings without manually sending G-code.

by this do you mean that once you have gone ahead and hit the "Begin Printing Over USB" button within S3D, you can no longer change any settings within the print?  say, like you mentioned in your first post the Z-Axis offset in the FFF settings?

I was able to print successfully, but I haven't tweaked them. I use Repetier myself.

I printed one thing with SoliPrint, then I figured out how to get S3D to work and I haven' turned back.  SoliPrint in it's current form is unusable IMO.

For S3D: Go to Help at the top, click "Configuration Assistant".  You add a printer (select Other).  Set it as dual extruder w heated.  Set the build volume as 200x200x200mm.

Then for my starting G-code (under Scripts within the Process you create):
G28 ; home all axes
G1 Z-5.0 F5000 ; Move platform down 5mm
M565 Z-1
G29; Bed Check - Z-Offset

Ending G-code:
G28 X0 Y0 ; home X axis and Y axis
G90
G91
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M84 ; disable motors

This should get you started.  Onward!

The problem I am encountering is: the nozzle is so close to the glass, the first layer cannot extrude onto the platform. I went into the FFF Settings  (under Process) in S3D and changed the Z axis G-code offset (under "G-code" tab) to 0.25 which has gotten me printing at the center.  The symptom I am seeing is the Outline/Perimeter shell peels off towards the front of the machine (from the Z-offset calibration in SoliPrint I can tell my build plate is lower at the front).  Is S3D not taking this into account?

The whole auto-leveling aspect of the Press is like a black box to me.

Thoughts? Solutions?

=======================
Notes on what I've done...

-----I messaged Simplify3D support about driving the Press with S3D.  You simply add a printer (select: "Other") in the Configuration Wizard and set the parameters (i.e. 200mm x 200mm x 200mm, etc).

-----I'm using MacGuyverX's start & end G-code he posted here:
Soliforum.com/topic/9214/sd-press-under-the-kimono/page/3/

"Here's my start/ending gcode for Slic3r.
Start :
G28 ; home all axis
G1 Z-5.0 F5000 ; Move platform down 5mm
M565 Z-1
G29 ; Bed Check - Z-Offset

End:
G28 X0 Y0  ; home X axis and y axis
G90
G91
M104 S0 ; kill extruder temperature
M140 S0 ; kill bed temperature
M84 ; disable motors

This way jobs sent to OctoPrint will Home all Axis and check the Z-offset right before the print."