<![CDATA[SoliForum - 3D Printing Community — Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/topic/9200/solidoodle-workbench-apprentice-stop-in-mid-print/ Thu, 15 Jan 2015 20:59:04 +0000 PunBB <![CDATA[Re: Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/post/79252/#p79252 Check that you don't have any auto update software running on your computer and that all sleep mode/hibernate modes/screensavers are turned off.

Best software is a tough one.

Most familiar is R-H and Slic3r at least around these parts.

]]> Thu, 15 Jan 2015 20:59:04 +0000 https://www.soliforum.com/post/79252/#p79252 <![CDATA[Re: Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/post/79236/#p79236 When it stops that the heat plate is  still stays hot and the extruder still hot
What is the best software to run ?

]]> Thu, 15 Jan 2015 20:29:13 +0000 https://www.soliforum.com/post/79236/#p79236 <![CDATA[Re: Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/post/79149/#p79149 Seems like you either have a short or you have to play with one of the plugs. Your problem is either from the heater, thermistor, or extruder motor....but we need a bit more info.

Does it make any sounds when it stops?
What does the temp graph show? It should be a fairly steady line. Slight fluctuation is normal.
What is happening when it stops? Is RH switching between extruders?

]]> Thu, 15 Jan 2015 16:18:30 +0000 https://www.soliforum.com/post/79149/#p79149 <![CDATA[Re: Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/post/79146/#p79146 Did you notice the extruder temp when it stopped?

]]> Thu, 15 Jan 2015 16:01:34 +0000 https://www.soliforum.com/post/79146/#p79146 <![CDATA[Re: Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/post/79123/#p79123 I did not get any error codes
I am using setupRepetierHostSolidoodle_0_85_117
Is there something better to use ?
Can I use the the updated RepetierHost?

]]> Thu, 15 Jan 2015 13:13:54 +0000 https://www.soliforum.com/post/79123/#p79123 <![CDATA[Re: Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/post/79079/#p79079 Locking up as in the program freezes? What software? Do you get error codes of any kind?

]]> Thu, 15 Jan 2015 04:54:50 +0000 https://www.soliforum.com/post/79079/#p79079 <![CDATA[Solidoodle Workbench Apprentice stop in mid print]]> https://www.soliforum.com/post/79074/#p79074 my Solidoodle Workbench Apprentice is stopping in the middle of printing it like the software is locking up on it anyone having problems like this ?? what should i look for to fix it ?

]]> Thu, 15 Jan 2015 04:19:15 +0000 https://www.soliforum.com/post/79074/#p79074