<![CDATA[SoliForum - 3D Printing Community — Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/topic/9170/images-for-reference-true-1mm-layers-not-on-a-da-vinci/ Sat, 30 Jan 2016 16:29:33 +0000 PunBB <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115355/#p115355 http://i700.photobucket.com/albums/ww10/deusex-1/things.jpg

The face is 5 inches long and the Pred is 7 inches long.
Done on my Duo 2.0A using simplify3D on medium settings.

]]> Sat, 30 Jan 2016 16:29:33 +0000 https://www.soliforum.com/post/115355/#p115355 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115348/#p115348 Yes, all you need is there :
http://www.lesimprimantes3d.fr/forum/to … ment-21710

You have to use XYZware advanced mode.
Slice with slicer 3 with bundle config file, export the gcode. open gcode file with notepad and copy from the line 17 at the end.

in XYZware adv, import fichier "entete XYZware.3w" and paste the gcode at the line 39. and print.

]]> Sat, 30 Jan 2016 14:10:51 +0000 https://www.soliforum.com/post/115348/#p115348 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115343/#p115343 sangha2006 wrote:

Da vinci junior mod at 0.05

Can the junior even do 0.05mm ??

]]> Sat, 30 Jan 2016 10:02:26 +0000 https://www.soliforum.com/post/115343/#p115343 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115342/#p115342 http://soliforum.com/i/?XcsHxk2.jpg

Da vinci junior mod at 0.05

]]> Sat, 30 Jan 2016 09:35:33 +0000 https://www.soliforum.com/post/115342/#p115342 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115145/#p115145 Not from a davinci but I wanted to try it too
http://soliforum.com/i/?bRseTZ5.jpg
http://soliforum.com/i/?g5y8Zd9.jpg

]]> Wed, 27 Jan 2016 12:10:24 +0000 https://www.soliforum.com/post/115145/#p115145 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115019/#p115019 It's difficult to compare Timberfill with regular PLA given that it's wood-based.
I prefer it to Woodfill though, much easier to print and sticks to the bed great.

]]> Mon, 25 Jan 2016 19:10:57 +0000 https://www.soliforum.com/post/115019/#p115019 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115018/#p115018 scobo wrote:

Well, if we're comparing results with non-stock setups, here's mine with the E3D (direct drive).
0.1mm using Timberfill, the large one is 80mm in height, the small one 40mm.

http://i882.photobucket.com/albums/ac28/scobodon/c9db1074474208e75b855854bf9193e1_zpsrlbejzpz.jpg

Wow looks great. But the premium filament dosent make a big differnce.

]]> Mon, 25 Jan 2016 18:55:30 +0000 https://www.soliforum.com/post/115018/#p115018 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115015/#p115015 Well, if we're comparing results with non-stock setups, here's mine with the E3D (direct drive).
0.1mm using Timberfill, the large one is 80mm in height, the small one 40mm.

http://i882.photobucket.com/albums/ac28/scobodon/22dab7108406a3e3e0bc0951f380c4ae_zpsjckww76d.jpg

]]> Mon, 25 Jan 2016 18:37:49 +0000 https://www.soliforum.com/post/115015/#p115015 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115014/#p115014 .1 layer height cheap PLA filament from eBay layer fan Da Vinci 1.0a Blue E3D Bowden custom X Carriage

]]> Mon, 25 Jan 2016 17:58:52 +0000 https://www.soliforum.com/post/115014/#p115014 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115012/#p115012 social wrote:

Guys I'm having hellish problems with my Da Vinci 1.0 with regards to the accuracy of the height things come out at.
I've just printed a cube 9mm square and although it's 9mm in the x and y plane it prints only 8mm high! this is at 0.2mm layer height. Basically everything I print comes out not the correct height. Any ideas?

Your steps per mm on the Z axis are not correct. Unfortunate for you on an XYZ printer if you are running stock firmware this can not be accessed or changed.. Your only other possibility is your initial layer is way too squished.. But then that would mean the first 5 layers are all squished based on a .2mm layer height to loose 1mm.

]]> Mon, 25 Jan 2016 16:19:13 +0000 https://www.soliforum.com/post/115012/#p115012 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/115006/#p115006 Guys I'm having hellish problems with my Da Vinci 1.0 with regards to the accuracy of the height things come out at.
I've just printed a cube 9mm square and although it's 9mm in the x and y plane it prints only 8mm high! this is at 0.2mm layer height. Basically everything I print comes out not the correct height. Any ideas?

]]> Mon, 25 Jan 2016 13:41:36 +0000 https://www.soliforum.com/post/115006/#p115006 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/81657/#p81657 Just print one of these http://www.thingiverse.com/thing:529837 and attach a 40mm fan.
I power mine from it's own 12v supply. Dead easy !

]]> Mon, 26 Jan 2015 17:27:13 +0000 https://www.soliforum.com/post/81657/#p81657 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/81653/#p81653 Scobo;  The fan one looks great.  Is there a writeup to the fan setup you are running?

]]> Mon, 26 Jan 2015 16:52:32 +0000 https://www.soliforum.com/post/81653/#p81653 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/79804/#p79804 madmike8 wrote:

Scobo, that "fan on" owl looks pretty darn good to me.

Cheers. Not much wrong with yours either.
It didn't occur to me to try the fan at first but it certainly made a difference with this model.
I find it's the only way to get clean prints with tall, thin parts too. Even at thicker layer heights.

]]> Sat, 17 Jan 2015 22:16:30 +0000 https://www.soliforum.com/post/79804/#p79804 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> https://www.soliforum.com/post/79801/#p79801 Scobo, that "fan on" owl looks pretty darn good to me.

]]> Sat, 17 Jan 2015 22:08:02 +0000 https://www.soliforum.com/post/79801/#p79801