<![CDATA[SoliForum - 3D Printing Community — Extruder Cooling Down when it gets to the back of the bed Davinci 1.0A]]> https://www.soliforum.com/topic/9117/extruder-cooling-down-when-it-gets-to-the-back-of-the-bed-davinci-10a/ Sun, 11 Jan 2015 05:34:23 +0000 PunBB <![CDATA[Re: Extruder Cooling Down when it gets to the back of the bed Davinci 1.0A]]> https://www.soliforum.com/post/78441/#p78441 Well i had a mess around with it made sure all the connections were good and it seems to have fixed my problem getting perfect prints everytime now.

Thanks For the Help Guys.

]]> Sun, 11 Jan 2015 05:34:23 +0000 https://www.soliforum.com/post/78441/#p78441 <![CDATA[Re: Extruder Cooling Down when it gets to the back of the bed Davinci 1.0A]]> https://www.soliforum.com/post/78384/#p78384 I had the same issue.  Icut the connector off, soldered the wires and used electrical tape.  This also fixed my problem.

]]> Sat, 10 Jan 2015 19:56:38 +0000 https://www.soliforum.com/post/78384/#p78384 <![CDATA[Re: Extruder Cooling Down when it gets to the back of the bed Davinci 1.0A]]> https://www.soliforum.com/post/78305/#p78305 carl_m1968 wrote:
Wataglue wrote:

hi guys has anyone else experienced a similar problem my extruder will heat up fine when its over its drip tray and while printing on the front half of the bed it also seems fine but as soon as it goes to the back of the bed its like the extruder loses power or something and starts to cool down rapidly causing it to click because its trying to get filament but unsuccessfully. if anyone has any ideas i would be very grateful.

Thanks.

It is the black connector above the extruder with the two white wires. It has very poor quality and looses connection. Your best option is to replace it with better connectors or just use wire nuts and connect the wires directly.


Thanks ill give it a try and see how it goes.

]]> Sat, 10 Jan 2015 02:06:23 +0000 https://www.soliforum.com/post/78305/#p78305 <![CDATA[Re: Extruder Cooling Down when it gets to the back of the bed Davinci 1.0A]]> https://www.soliforum.com/post/78304/#p78304 Wataglue wrote:

hi guys has anyone else experienced a similar problem my extruder will heat up fine when its over its drip tray and while printing on the front half of the bed it also seems fine but as soon as it goes to the back of the bed its like the extruder loses power or something and starts to cool down rapidly causing it to click because its trying to get filament but unsuccessfully. if anyone has any ideas i would be very grateful.

Thanks.

It is the black connector above the extruder with the two white wires. It has very poor quality and looses connection. Your best option is to replace it with better connectors or just use wire nuts and connect the wires directly.

]]> Sat, 10 Jan 2015 01:56:11 +0000 https://www.soliforum.com/post/78304/#p78304 <![CDATA[Extruder Cooling Down when it gets to the back of the bed Davinci 1.0A]]> https://www.soliforum.com/post/78301/#p78301 hi guys has anyone else experienced a similar problem my extruder will heat up fine when its over its drip tray and while printing on the front half of the bed it also seems fine but as soon as it goes to the back of the bed its like the extruder loses power or something and starts to cool down rapidly causing it to click because its trying to get filament but unsuccessfully. if anyone has any ideas i would be very grateful.

Thanks.

]]> Sat, 10 Jan 2015 01:46:59 +0000 https://www.soliforum.com/post/78301/#p78301