SoliForum - 3D Printing Community — loose lm8uu bearings

Re: loose lm8uu bearings

null@example.com (wardjr) — Tue, 23 Dec 2014 19:07:57 +0000

Yep, I meant extrusion multiplier.

Re: loose lm8uu bearings

null@example.com (satman49) — Tue, 23 Dec 2014 17:35:26 +0000

thanks, I'LL try that.

Re: loose lm8uu bearings

null@example.com (jagowilson) — Tue, 23 Dec 2014 17:32:29 +0000

Multiplier. Flow rate slider might work, but I think you'll have better results with the multiplier. Flow rate slider can cause extruder clicking if you aren't careful.

Re: loose lm8uu bearings

null@example.com (satman49) — Tue, 23 Dec 2014 17:30:18 +0000

wardjr wrote:

Kinda, but you could just bump up your extrusion rate slightly.

Do you mean the mulitplier or the flow rate slider?

Re: loose lm8uu bearings

null@example.com (satman49) — Tue, 23 Dec 2014 02:24:00 +0000

thanks ya'll , I'll give both a go.

Re: loose lm8uu bearings

null@example.com (slimstar2) — Tue, 23 Dec 2014 01:07:43 +0000

Hi Satman49 I printed these for my SD 3 Bearings snapped in nice and tigth
http://www.thingiverse.com/thing:281795/#files

He designed in a slight ridge that holds them nice and snugly

Re: loose lm8uu bearings

null@example.com (wardjr) — Tue, 23 Dec 2014 00:55:53 +0000

Kinda, but you could just bump up your extrusion rate slightly.

loose lm8uu bearings

null@example.com (satman49) — Tue, 23 Dec 2014 00:32:50 +0000

I am printing a spare right side y carriage.The bearings are a bit loose. I know that I can wrap some tape around them to tighten them up. Somewhere I saw on here someone had a suggestion on how to print them so they would be tighter but I can't find it. Does anybody remember that?