SoliForum - 3D Printing Community — Type of bearing: INA TC815 ---> found

Re: Type of bearing: INA TC815 ---> found

null@example.com (sturmth) — Fri, 16 Jan 2015 07:34:45 +0000

Hi everybody!
For people in germany having trouble with the bearing I can help now. I have some of the original 1/2" bearings with washers. Please contact me via my blog sturm.selfhost.eu.

Regards
Thomas

Re: Type of bearing: INA TC815 ---> found

null@example.com (insta) — Thu, 25 Dec 2014 18:07:11 +0000

Mine's now running on a bronze thrust washer against one of the smooth steel washers from the thrust bearing. The bronze washer hasn't died or really worn down yet, but we'll see...

Re: Type of bearing: INA TC815 ---> found

null@example.com (cor5151) — Mon, 22 Dec 2014 03:50:49 +0000

i use these, http://www.amazon.com/gp/product/B00FLY … &psc=1
work great and very strong.

Type of bearing: INA TC815 ---> found

null@example.com (sturmth) — Fri, 19 Dec 2014 11:37:32 +0000

The bearing of my filastruder is broken. Obviously there was no lubricant left.
I need to buy a new one. Can anybody tell me the exact type. I german product catalogs I cannot find an axial-cylinder-roll-bearing with 13mm inner diameter.
Thanks in advance ...

Thomas

I found it by myself:
It is the INA TC815, Dc1=1/2",Dc=0,938"
Might be a problem to find it in germany .....

Edit:
It is a real problem. In whole europe I did not find a reseller for bearings with half inch. I ordered now in US. There is a comparable version called NTA815. It is identical but not from INA.

If anybody needs this bearing in Germany, contact me in mid January 2015. I ordered some ...