<![CDATA[SoliForum - 3D Printing Community — 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/topic/8774/285mm-filastruder-users-what-nozzle-size-has-worked-the-best/ Mon, 28 Nov 2016 16:16:40 +0000 PunBB <![CDATA[Re: 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/128435/#p128435 Hi All,

I just bought my filastruder and have a Ultimaker, so I would like to make 3.0mm filament with ABS MG-94, do you have any recomendation for the first test?

Cheers

]]> Mon, 28 Nov 2016 16:16:40 +0000 https://www.soliforum.com/post/128435/#p128435 <![CDATA[Re: 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/75823/#p75823 I'm currently extruding black ABS and am getting a little over 3 in / min.

]]> Fri, 19 Dec 2014 12:25:16 +0000 https://www.soliforum.com/post/75823/#p75823 <![CDATA[Re: 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/75615/#p75615 What kind of speeds are you seeing? What material?

]]> Wed, 17 Dec 2014 22:03:29 +0000 https://www.soliforum.com/post/75615/#p75615 <![CDATA[Re: 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/75614/#p75614 I have mine mounted vertically which tends to make the filament thinner.  I have gradually drilled mine out to 3.2mm.  I try to keep my filament between 2.9 and 3.0 mm.

]]> Wed, 17 Dec 2014 21:48:44 +0000 https://www.soliforum.com/post/75614/#p75614 <![CDATA[Re: 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/75607/#p75607 bbriggsgeek wrote:

I drilled mine out to give me faster extrusion.  Temperature also affects diameter.

What size drill but did you use?

]]> Wed, 17 Dec 2014 20:12:42 +0000 https://www.soliforum.com/post/75607/#p75607 <![CDATA[Re: 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/75596/#p75596 I drilled mine out to give me faster extrusion.  Temperature also affects diameter.

]]> Wed, 17 Dec 2014 17:26:14 +0000 https://www.soliforum.com/post/75596/#p75596 <![CDATA[Re: 2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/75517/#p75517 Standard nozzle can do 3mm or 2.85mm depending on extrusion temperature and height from the floor/bottom of the loop. It is drilled to 2.77mm.

Extruding: Not much difference. Filawinding: You'll need to move the PTFE holder further away so the servo doesn't have to flex the filament as much to move it back and forth on the spool.

]]> Wed, 17 Dec 2014 01:42:23 +0000 https://www.soliforum.com/post/75517/#p75517 <![CDATA[2.85mm Filastruder Users- What nozzle size has worked the best?]]> https://www.soliforum.com/post/75511/#p75511 Does the standard 3mm Filastruder nozzle produce 2.85mm, or has anyone drilled out their nozzle and found better results? I am starting to experiment with 3mm so thanks!

Also, what are the major differences in extruding and filawinding 2.85mm?

]]> Wed, 17 Dec 2014 01:09:23 +0000 https://www.soliforum.com/post/75511/#p75511