<![CDATA[SoliForum - 3D Printing Community — Print Centering Problem]]> https://www.soliforum.com/topic/8759/print-centering-problem/ Tue, 16 Dec 2014 03:52:38 +0000 PunBB <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75379/#p75379 Happy to hear you got it working. Have fun printing!

]]> Tue, 16 Dec 2014 03:52:38 +0000 https://www.soliforum.com/post/75379/#p75379 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75377/#p75377 I fixed the wires and it seems to be working. Thanks a lot guys!

Now I just gotta figure out how to adjust the heat and flow settings.

I gotta wonder why those wires were just torn though, kinda weird..

Thanks again,
    ~ Jody

]]> Tue, 16 Dec 2014 03:34:05 +0000 https://www.soliforum.com/post/75377/#p75377 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75362/#p75362 It wouldn't have tried to go right as it is.  It thinks it is against the switch right now.  When the switch is triggered it actually opens the switch.  It seems a little backward but that's how it works.  So when it is unplugged or the wires are broken it will only try and move away from the switch (left).

]]> Tue, 16 Dec 2014 01:51:58 +0000 https://www.soliforum.com/post/75362/#p75362 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75359/#p75359 Ah ok, that makes sense.
I don't remember it even trying to calibrate by touching the right side before going too far to the left but it's possible I just didn't notice.

Thanks a lot man, I'll going to attempt to fix the wires now, I'll let you know how it goes.

]]> Tue, 16 Dec 2014 01:47:33 +0000 https://www.soliforum.com/post/75359/#p75359 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75355/#p75355 There is no switch on the left side.  It uses the one on the right and starts at 200mm's then it counts down to zero as it moves left.  Once zero is reached it won't go further.  It's how (based on your symptoms) I so quickly narrowed it down to the switch and also why I asked the questions I asked.

]]> Tue, 16 Dec 2014 01:29:25 +0000 https://www.soliforum.com/post/75355/#p75355 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75354/#p75354 They are related trust me.  Try and fix it and let me know if you need help with anything.

]]> Tue, 16 Dec 2014 01:24:24 +0000 https://www.soliforum.com/post/75354/#p75354 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75353/#p75353 wardjr wrote:

The switch on the SD4 is on the extruder carriage and is the only switch on the carriage.  Usually 2 black wires and they go into the braided harness down to the board.  I would start at the switch and if those wires look good look at the board for a loose plug.

Found it... they appear to be ripped apart and tucked under the heat-sync... So I guess that explains something. It looks like the end switch only triggers when it hits the right side of its limit though and my problem is that it's going too far left, I don't see how those could be related but it's definitely weird that the wires are just cut/ripped.

]]> Tue, 16 Dec 2014 01:21:26 +0000 https://www.soliforum.com/post/75353/#p75353 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75350/#p75350 The switch on the SD4 is on the extruder carriage and is the only switch on the carriage.  Usually 2 black wires and they go into the braided harness down to the board.  I would start at the switch and if those wires look good look at the board for a loose plug.

]]> Tue, 16 Dec 2014 01:17:13 +0000 https://www.soliforum.com/post/75350/#p75350 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75348/#p75348 wardjr wrote:

My guess is your X-axis endstop switch is unplugged or otherwise not functioning properly.

Where can I see a picture of where that is and what it looks like?

]]> Tue, 16 Dec 2014 01:12:17 +0000 https://www.soliforum.com/post/75348/#p75348 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75344/#p75344 My guess is your X-axis endstop switch is unplugged or otherwise not functioning properly.

]]> Tue, 16 Dec 2014 01:04:04 +0000 https://www.soliforum.com/post/75344/#p75344 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75343/#p75343 "G28 ;home all axis"

When I use that, it moves the extruder about half an inch to the left, it doesn't center on any location, I wonder if that's a clue to what's happening.. it seems like it's just adding in left movements in between everything it does.

Edit: But yeah, I'll compare mine. Thanks a lot guys. I'll be back in a few after I check.

]]> Tue, 16 Dec 2014 01:00:56 +0000 https://www.soliforum.com/post/75343/#p75343 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75342/#p75342 @OP you're going to want compare your start code with what Satman49 posted

]]> Tue, 16 Dec 2014 01:00:14 +0000 https://www.soliforum.com/post/75342/#p75342 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75341/#p75341 this my start gcode

G21; set mm units
G28 ;home all axis
G90; set absolute coordinates
G92 E0; reset extruder distance
M104 S230; set extruder temp and start heating
G1 Z5 F300 ;move platform down 5mm
G1 X145 Y145 F3000 ; move to back right corner
M109 S230; wait for extruder temp to be reached
G1 Z[first_layer_height] F200 ;move platform close to nozzle
G1 E7; extruder anchor
G1 F3000; Set Feed rate for first move
G92 E0; reset extrusion distance

]]> Tue, 16 Dec 2014 00:56:10 +0000 https://www.soliforum.com/post/75341/#p75341 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75340/#p75340 @ Satman49 can you provide a screenshot of a proper start code?  I'm on smartphone

]]> Tue, 16 Dec 2014 00:45:20 +0000 https://www.soliforum.com/post/75340/#p75340 <![CDATA[Re: Print Centering Problem]]> https://www.soliforum.com/post/75339/#p75339 satman49 wrote:

just a hunch  in printer settings/printer tab this time, at the very bottom are the  Invert direction in controls boxes checked?

So if this isn't the issue there is most likely an end stop not functioning properly.

]]> Tue, 16 Dec 2014 00:42:51 +0000 https://www.soliforum.com/post/75339/#p75339