<![CDATA[SoliForum - 3D Printing Community — where can i find up to date slic3r setting for SD2 ?]]> https://www.soliforum.com/topic/8733/where-can-i-find-up-to-date-slic3r-setting-for-sd2/ Sun, 04 Jan 2015 01:43:11 +0000 PunBB <![CDATA[Re: where can i find up to date slic3r setting for SD2 ?]]> https://www.soliforum.com/post/77372/#p77372 I was looking for some Slic3r settings for SD2, too - however they (Slic3r) have changed their .ini files in newer versions.
Based on the "old-style" settings that had been on the SD-blog, I figured out some settings that work pretty well for me with ABS, please find the settings attached - I'm glad if anybody else can use the settings. They come without any guarantee, though! wink

]]> Sun, 04 Jan 2015 01:43:11 +0000 https://www.soliforum.com/post/77372/#p77372 <![CDATA[Re: where can i find up to date slic3r setting for SD2 ?]]> https://www.soliforum.com/post/75221/#p75221 contact Solidoodle tech support for that answer.

]]> Mon, 15 Dec 2014 03:06:21 +0000 https://www.soliforum.com/post/75221/#p75221 <![CDATA[Re: where can i find up to date slic3r setting for SD2 ?]]> https://www.soliforum.com/post/75100/#p75100 I probably should have mentioned that i installed Slic3r's most recent linux version 1.1.7 and set the correct path in RepieterHost.

I just need to know which slic3r settings are the correct ones to use. the ones bundled in the official solidoodle software , the ini files have slightly different values then the wiki shows for the SD2.

]]> Sun, 14 Dec 2014 02:50:54 +0000 https://www.soliforum.com/post/75100/#p75100 <![CDATA[Re: where can i find up to date slic3r setting for SD2 ?]]> https://www.soliforum.com/post/75099/#p75099 Open Slic3r, click on the Help tab, then open "Search For Updates"

I recently updated RH while attempting to upgrade boards, and I had a problem with Slic3r. I had to manually update it with RD and then I noticed every single profile I had was messed up and needed tweaking. Not a massive issue, but a nuisance. My quality suffered until I tweaked said profiles.

]]> Sun, 14 Dec 2014 01:53:41 +0000 https://www.soliforum.com/post/75099/#p75099 <![CDATA[where can i find up to date slic3r setting for SD2 ?]]> https://www.soliforum.com/post/75098/#p75098 Are the slic3r settings on the wiki the most recent ones for the SD2 ?

http://wiki.solidoodle.com/slic3r-settings-sd-2-at-3mm

I just had a hard drive crash so I installed a new version of ubuntu 14.4 and setup the solidoodle software from the official site. I then installed the latest version of Repetier host. Everything is up and working except the default slic3r settings that came in the official software differ from the ones in the wiki. My prints are not coming out very well with either settings.

Does anyone know which are the preferred setting for slic3r with a SD2 ? Or better, does anyone have a good working set of settings they can post.

Thanks, Jeremy

]]> Sun, 14 Dec 2014 01:41:46 +0000 https://www.soliforum.com/post/75098/#p75098