<![CDATA[SoliForum - 3D Printing Community — help with flashing a board]]> https://www.soliforum.com/topic/8563/help-with-flashing-a-board/ Tue, 02 Dec 2014 21:14:50 +0000 PunBB <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73762/#p73762 huge shout out to you as well printing me the mount pieces.

jagowilson wrote:

Now go get some filaments more fun than ABS like t glase or woodfill. Woodfill is probably my next experiment.

]]> Tue, 02 Dec 2014 21:14:50 +0000 https://www.soliforum.com/post/73762/#p73762 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73749/#p73749 Now go get some filaments more fun than ABS like t glase or woodfill. Woodfill is probably my next experiment.

]]> Tue, 02 Dec 2014 19:22:23 +0000 https://www.soliforum.com/post/73749/#p73749 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73732/#p73732 that did the trick. Boy this hotend runs like a dream


wardjr wrote:
IronMan wrote:

I would go for the longer screw smile

Or put the existing one upside down wink
Glad to hear it is working.

]]> Tue, 02 Dec 2014 17:37:17 +0000 https://www.soliforum.com/post/73732/#p73732 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73726/#p73726 IronMan wrote:

I would go for the longer screw smile

Or put the existing one upside down wink
Glad to hear it is working.

]]> Tue, 02 Dec 2014 16:24:45 +0000 https://www.soliforum.com/post/73726/#p73726 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73725/#p73725 I would go for the longer screw smile

]]> Tue, 02 Dec 2014 16:19:31 +0000 https://www.soliforum.com/post/73725/#p73725 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73724/#p73724 one last thing. I didnt get a different z end stop mount. should i just j\use a screw that's 6 mm longer? or is there a way to offset that in slicer?

IronMan wrote:

Glad you got it going!!  You'll love the E3D!

]]> Tue, 02 Dec 2014 16:03:17 +0000 https://www.soliforum.com/post/73724/#p73724 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73723/#p73723 Glad you got it going!!  You'll love the E3D!

]]> Tue, 02 Dec 2014 15:53:54 +0000 https://www.soliforum.com/post/73723/#p73723 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73721/#p73721 Finally got it to work. HUGE shout out to Ironman and Wardjr. Thank you too so much

]]> Tue, 02 Dec 2014 15:32:52 +0000 https://www.soliforum.com/post/73721/#p73721 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73718/#p73718 The Arduino .022 does not come with the necessary elements in the Hardware folder and the firmware.  Those 2 items need to be installed as well.  This link should help to solve your issue:

http://www.soliwiki.com/Updating_Solido … odle_2.2F3

If you can get through it with no errors, then you will need to modify the configuration.h tab in the marlin.pde file to define the Soliddodle 3 and the other thermal changes for the E3D like Maxtemp and Semtec Thermistor selection, etc as called out in the E3D instructions.  Then you can do a final upload.

]]> Tue, 02 Dec 2014 14:40:53 +0000 https://www.soliforum.com/post/73718/#p73718 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73716/#p73716 so version 022 doesnt have the selection for my board. back in 1.05 it does but it shows me the line highlighted with an error saying "rx_buffer not declared" in the marlin section not configuration.h.

]]> Tue, 02 Dec 2014 14:18:55 +0000 https://www.soliforum.com/post/73716/#p73716 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73713/#p73713 I'm just affraid to hit upload when I'm getting errors after compiling and verifying. Wanted to get it straightened out first


satman49 wrote:

take a look at  https://www.youtube.com/watch?feature=p … FyH6aYd1M/

]]> Tue, 02 Dec 2014 13:17:03 +0000 https://www.soliforum.com/post/73713/#p73713 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73703/#p73703 take a look at  https://www.youtube.com/watch?feature=p … FyH6aYd1M/

]]> Tue, 02 Dec 2014 05:16:26 +0000 https://www.soliforum.com/post/73703/#p73703 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73702/#p73702 I was hitting save, verify and it was giving me an error code. I'm doing it wrong aren't I

IronMan wrote:

shields1.as,

When you try to upload...are you using the reset button?  In other words: Save, Verify, Upload, Hit Reset Button(on Board)?

]]> Tue, 02 Dec 2014 05:10:33 +0000 https://www.soliforum.com/post/73702/#p73702 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73675/#p73675 satman49 wrote:

I have a sang board 1.3  and 3edv6 too and I believe I used .022 version.

+1...definately try the .022 version...

]]> Tue, 02 Dec 2014 00:59:35 +0000 https://www.soliforum.com/post/73675/#p73675 <![CDATA[Re: help with flashing a board]]> https://www.soliforum.com/post/73673/#p73673 shields1.as,

When you try to upload...are you using the reset button?  In other words: Save, Verify, Upload, Hit Reset Button(on Board)?

]]> Tue, 02 Dec 2014 00:44:14 +0000 https://www.soliforum.com/post/73673/#p73673