https://www.soliforum.com/topic/8518/solidoodle-4-not-printing-on-center/ Mon, 01 Dec 2014 08:44:14 +0000 PunBB https://www.soliforum.com/post/73600/#p73600 haven't tried adjusting it myself, too many other issues to fix first.

]]> Mon, 01 Dec 2014 08:44:14 +0000 https://www.soliforum.com/post/73600/#p73600 https://www.soliforum.com/post/73545/#p73545 Thank you for your response. Can you please tell me how I can adjust the bed? I have switched back to Slic3r. So far it is printing ok but it is still off from the center. I'm quite new to the 3d printing world and still learning.

]]> Sun, 30 Nov 2014 22:14:11 +0000 https://www.soliforum.com/post/73545/#p73545 https://www.soliforum.com/post/73544/#p73544 I'd just like to tell you my Solidoodle 4 had this issue as well, you're not the only one. Maybe something is wrong in the SD4 preset of Repetier Host.

]]> Sun, 30 Nov 2014 22:11:55 +0000 https://www.soliforum.com/post/73544/#p73544 https://www.soliforum.com/post/73505/#p73505 Looks like you need to adjust the bed front and bed left (right) values.  It is in the same window as the printer bed dimensions.  Print a 20 mm calibration cube (you can stop it after the first layer) that is centered in the bed.    Before removing it from the bed, measure the distances to the bed sides, do the math, and adjust accordingly.

]]> Sun, 30 Nov 2014 14:40:49 +0000 https://www.soliforum.com/post/73505/#p73505 https://www.soliforum.com/post/73383/#p73383 Hello Everyone. I'm having some issues centering my printout on the printer bed. I have tried adjusting the XY values on the printer settings but still no go. I'm using Repetier V1.0.6 and Cura for slicing. I have tried toi search the forum but did not find a definite answer or solution to my issue. Any help will be greatly appreciated.

]]> Sat, 29 Nov 2014 03:44:48 +0000 https://www.soliforum.com/post/73383/#p73383