<![CDATA[SoliForum - 3D Printing Community — Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/topic/8438/nozzle-keeps-knocking-over-thin-towers-at-1mm/ Mon, 24 Nov 2014 01:54:24 +0000 PunBB <![CDATA[Re: Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/post/72849/#p72849 Thank you, I will try that

]]> Mon, 24 Nov 2014 01:54:24 +0000 https://www.soliforum.com/post/72849/#p72849 <![CDATA[Re: Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/post/72824/#p72824 IronMan wrote:

You can try "Lift Z" under the Slic3r config settings; Printer Settings Tab; Extruder 1...

Yes, that's the one.

]]> Sun, 23 Nov 2014 22:18:24 +0000 https://www.soliforum.com/post/72824/#p72824 <![CDATA[Re: Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/post/72811/#p72811 You can try "Lift Z" under the Slic3r config settings; Printer Settings Tab; Extruder 1...

]]> Sun, 23 Nov 2014 19:14:10 +0000 https://www.soliforum.com/post/72811/#p72811 <![CDATA[Re: Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/post/72797/#p72797 If you mean the thin tower is knocked off when another part of the layer is printer and the hotend moves to the thin tower, then there's a solution for that. If you mean it gets knocked of when being printed itself, then I myself donkt know a solution.

Solution for the first is adding an option in your slic3r to instead of moving from one part of the layer to the next to move the bed down, move the nozzle to the new place, and move the bed back up again.

]]> Sun, 23 Nov 2014 15:17:39 +0000 https://www.soliforum.com/post/72797/#p72797 <![CDATA[Re: Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/post/72791/#p72791 Why did I post this in the Solidooddle general discussion? If one the moderators comes by this thread can you move it to Help/Repair/Maintenance?

]]> Sun, 23 Nov 2014 14:39:07 +0000 https://www.soliforum.com/post/72791/#p72791 <![CDATA[Re: Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/post/72758/#p72758 I got things like that to work better by adding a bed stabilizer and a cooling fan, but I still had problems with some parts.

http://home.comcast.net/~tomhorsley/har … table.html

http://home.comcast.net/~tomhorsley/har … wmfan.html

These both fit my SD2, other models or even other slightly different versions of the SD2 may or may not work :-(.

]]> Sun, 23 Nov 2014 03:56:31 +0000 https://www.soliforum.com/post/72758/#p72758 <![CDATA[Nozzle keeps knocking over thin towers at .1mm]]> https://www.soliforum.com/post/72754/#p72754 Any tips? Is it a calibration issue?

]]> Sun, 23 Nov 2014 03:14:29 +0000 https://www.soliforum.com/post/72754/#p72754