<![CDATA[SoliForum - 3D Printing Community — Print stops halfway]]> https://www.soliforum.com/topic/8431/print-stops-halfway/ Sun, 23 Nov 2014 14:18:29 +0000 PunBB <![CDATA[Re: Print stops halfway]]> https://www.soliforum.com/post/72790/#p72790 Same is true for the heat bed thermistor...check all those connections as well from the thermistor leads all the way back to the controller board.

]]> Sun, 23 Nov 2014 14:18:29 +0000 https://www.soliforum.com/post/72790/#p72790 <![CDATA[Re: Print stops halfway]]> https://www.soliforum.com/post/72771/#p72771 Hi, I checked every connection, everything is fine, I used another USB cable, USB PC port and even used another PC, nothing works

]]> Sun, 23 Nov 2014 05:52:31 +0000 https://www.soliforum.com/post/72771/#p72771 <![CDATA[Re: Print stops halfway]]> https://www.soliforum.com/post/72695/#p72695 IronMan wrote:

Check your hot end thermistor wiring...check for shorts / loose connections.  Also, make sure the wiring is secured properly and does not flex with movement of the carriage.

Yep

]]> Sat, 22 Nov 2014 14:34:53 +0000 https://www.soliforum.com/post/72695/#p72695 <![CDATA[Re: Print stops halfway]]> https://www.soliforum.com/post/72682/#p72682 Check your hot end thermistor wiring...check for shorts / loose connections.  Also, make sure the wiring is secured properly and does not flex with movement of the carriage.

]]> Sat, 22 Nov 2014 11:45:44 +0000 https://www.soliforum.com/post/72682/#p72682 <![CDATA[Print stops halfway]]> https://www.soliforum.com/post/72679/#p72679 Hi , I am recently experiencing this problem where my printer stops during the print. The extruder remain at the place where it stopped and the logs on the Repetier host shows: 18:06:46.496 : Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting). By the way, I also tried using Cura and it has the same problem. Please help. Thank you.

]]> Sat, 22 Nov 2014 10:16:36 +0000 https://www.soliforum.com/post/72679/#p72679