<![CDATA[SoliForum - 3D Printing Community — Slicer Infill problem]]> https://www.soliforum.com/topic/8416/slicer-infill-problem/ Sat, 22 Nov 2014 20:21:18 +0000 PunBB <![CDATA[Re: Slicer Infill problem]]> https://www.soliforum.com/post/72734/#p72734 accusedmonk wrote:

Mine i actually watched it change it back to the previous setting when i hit save, was quite frustrating.  It might have been fixed now though, i thought i remembered seeing a fix for it on the patch notes.

When this happens to me I change that setting by more than 1 and then go back to whatever setting I need.
Ex: change from 3 perimeters to 2 hit save and it bounces back to three.
Solution: change from three to 6 hit save and it sticks then change to 2 and save again.
It's a PITA but this method has always worked when this happens.

]]> Sat, 22 Nov 2014 20:21:18 +0000 https://www.soliforum.com/post/72734/#p72734 <![CDATA[Re: Slicer Infill problem]]> https://www.soliforum.com/post/72726/#p72726 Mine i actually watched it change it back to the previous setting when i hit save, was quite frustrating.  It might have been fixed now though, i thought i remembered seeing a fix for it on the patch notes.

]]> Sat, 22 Nov 2014 19:06:16 +0000 https://www.soliforum.com/post/72726/#p72726 <![CDATA[Re: Slicer Infill problem]]> https://www.soliforum.com/post/72723/#p72723 I was having similar issues seemed like it was not taking the changes . If I saved the changes it worked but if i just changed then on the screen it uses the saved profile.
Tin

]]> Sat, 22 Nov 2014 18:23:46 +0000 https://www.soliforum.com/post/72723/#p72723 <![CDATA[Re: Slicer Infill problem]]> https://www.soliforum.com/post/72721/#p72721 Double check that's it's actually changing it as well.  I've noticed a few times there's a glitch where it will let you put the new setting in, save the changes and it reverts back.  If it does that you can just edit the config file manually with notepad.

]]> Sat, 22 Nov 2014 18:04:17 +0000 https://www.soliforum.com/post/72721/#p72721 <![CDATA[Re: Slicer Infill problem]]> https://www.soliforum.com/post/72719/#p72719 Thanks for your thoughts guys.  I have several slicer profies setup so making sure I'm changing the correct profile is the first thing I do when something unexpected happens.

I did some more experimentation and it looks like it's just the one profile.  I'll just make a new one.  Weird though.

]]> Sat, 22 Nov 2014 17:57:08 +0000 https://www.soliforum.com/post/72719/#p72719 <![CDATA[Re: Slicer Infill problem]]> https://www.soliforum.com/post/72535/#p72535 Before you get too freaked out, make sure you're changing the settings in slic3r on the same profile you've selected in RH - I make this mistake all the time!! smile

]]> Fri, 21 Nov 2014 00:02:17 +0000 https://www.soliforum.com/post/72535/#p72535 <![CDATA[Re: Slicer Infill problem]]> https://www.soliforum.com/post/72529/#p72529 not sure on infill but some Slic3r settings need RH restarted b4 changes take effect seems like old settings leave ghost behind til reset

]]> Thu, 20 Nov 2014 21:44:25 +0000 https://www.soliforum.com/post/72529/#p72529 <![CDATA[Slicer Infill problem]]> https://www.soliforum.com/post/72527/#p72527 Hi All,

I'm on the latest Repetier and Slicer software and have noticed that I seem to get infill at about 50% no matter what percentage I select in the configuration.  This was happening before and after I updated.  Does anyone else have this problem or know a solution to it?  Thanks.

]]> Thu, 20 Nov 2014 21:08:33 +0000 https://www.soliforum.com/post/72527/#p72527