<![CDATA[SoliForum - 3D Printing Community — how to determine firmware version]]> https://www.soliforum.com/topic/815/how-to-determine-firmware-version/ Mon, 17 Dec 2012 22:03:12 +0000 PunBB <![CDATA[Re: how to determine firmware version]]> https://www.soliforum.com/post/7365/#p7365 dolmademike wrote:

Have you tried the .1mm Repetier setup?

I do all of my printing using Repetier Host at 0.1mm

]]> Mon, 17 Dec 2012 22:03:12 +0000 https://www.soliforum.com/post/7365/#p7365 <![CDATA[Re: how to determine firmware version]]> https://www.soliforum.com/post/7357/#p7357 Thanks The OldMan! It looks like I have current firmware as expected.

Have you tried the .1mm Repetier setup?

to NickytheGree --- efkaristo wink

]]> Mon, 17 Dec 2012 20:07:10 +0000 https://www.soliforum.com/post/7357/#p7357 <![CDATA[Re: how to determine firmware version]]> https://www.soliforum.com/post/7323/#p7323 Read the startup mesage when you first connect. It shows the firmware version.

]]> Mon, 17 Dec 2012 04:14:15 +0000 https://www.soliforum.com/post/7323/#p7323 <![CDATA[Re: how to determine firmware version]]> https://www.soliforum.com/post/7314/#p7314 I got my printer in early november and it already had the newer firmware, so I would assume yours would have to be the newest as well.

]]> Mon, 17 Dec 2012 02:20:47 +0000 https://www.soliforum.com/post/7314/#p7314 <![CDATA[how to determine firmware version]]> https://www.soliforum.com/post/7309/#p7309 Is there any way to tell what version of firmware I have?

I don't want to muck with arduino if I have the latest, and I do have a printer that just arrived in early December, so I expect I do. I ask because I tried the Repetier Host setup under the .1mm instructions and it was just awful. The stock Pronterface+ skeinforge worked great at .3mm. The Repetier setup just made terrible edges and the fill was even poor. So I'm guessing maybe I have old firmware?

thx

]]> Mon, 17 Dec 2012 00:51:49 +0000 https://www.soliforum.com/post/7309/#p7309