How did you get the dual colors on the rocket?

i used this model : http://www.thingiverse.com/thing:16993

your print one color parts.. then second color parts..

the female was builded in hexagon2.5 and carrara 8 from a free base and cleaned with meshlabs/netffab/meshmixer (see my other post : don't call her honey, if you want to print her)

the floor come from a Poser object and i just change the scale  and do a bit of cleaning to change it to a print-able object.. (source : http://www.renderosity.com/mod/bcs/dms-elven-rock/83038 ) then add the two pieces...
i do a lot of digital heroic fantasy drawing and this printer change my little corner of dream into a more physical world...

like this draft..

as it's a firts batch S2..
i change the firmware (thanks to Lawsy)
the Z screw (free .. thanks to solidoodle),
i add the anti-wobble-nut preloader(with a big O-ring instead of a Spring, thanks to matt_johnson)
a glass bed with kapton (i don't like the hairspray)

i do a simple leveling bed procedure and a extruder calibration (thanks to Ian Johnson )

and a lot of time... (tie interceptor at 0.1mm anyone ?  between 11 and 12 hours... i love to print when i sleep)..

but the S2 can do a lot of pretty good print just out of the box..

now i like to print between 0.18mm and 0.3mm... 0.1mm it's just too much time for not a big win ( i love 0.2mm with acetone bath) ... and 0.3mm is good for a lot of thing without a lot of little details..

Compagnon cube from portal.. rocket from Tintin (0.3mm acetone bath for the rocket, nothing for the cube)
my own diorama 'revenge on his tomb' (0.2mm)
and a Tie interceptor from starwars (0.1mm)