https://www.soliforum.com/topic/779/gap-in-kisslicer/ Thu, 13 Dec 2012 00:23:58 +0000 PunBB https://www.soliforum.com/post/7004/#p7004 It's the horizontal gap.  You want the support to be clear from the sides, but close enough that the thread won't droop going from the side to the support.  Given that bridging isn't KISSlicer's strong point right now, you want to keep that gap small.

]]> Thu, 13 Dec 2012 00:23:58 +0000 https://www.soliforum.com/post/7004/#p7004 https://www.soliforum.com/post/7002/#p7002 Is the support gap setting in KISSlicer a vertical gap between the support material and the piece of the object it's supporting or a horizontal gap between the column of support and the side of the object?  I'm guessing if it's a vertical gap you want the number as small as possible correct?

]]> Wed, 12 Dec 2012 23:19:32 +0000 https://www.soliforum.com/post/7002/#p7002