<![CDATA[SoliForum - 3D Printing Community — SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/topic/7373/sd4-firmware-with-solidoodle-board/ Fri, 28 Jul 2017 22:14:33 +0000 PunBB <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/136883/#p136883 Thanks!

It worked well!

For me i had a Marlin.ino.hex, not the Marlin.cpp.hex

Tthe whole link bootloader is http://blog.lincomatic.com/wp-content/u … derHID.zip

]]> Fri, 28 Jul 2017 22:14:33 +0000 https://www.soliforum.com/post/136883/#p136883 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/104580/#p104580 I doubt it, double check that you have the correct board chosen in Arduino and the correct com port selected.  In your configuration.h ensure you've selected the correct board number.  If it isn't showing up in device manager try re installing the driver. 
If it is showing up double check that you have the correct com port selected in RH.

]]> Tue, 01 Sep 2015 00:39:02 +0000 https://www.soliforum.com/post/104580/#p104580 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/104579/#p104579 thanks, I have a surface pro and completed on that or so I thought. I did all the steps but now when i started the printer and plugged the usb into the surface pro says no printer found. Did I somehow brick my board?

]]> Tue, 01 Sep 2015 00:20:27 +0000 https://www.soliforum.com/post/104579/#p104579 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/104547/#p104547 Thanks grob wink
I have not tried but have heard that you can use virtual windows to flash.  My first choice would be borrow a windows machine for flashing.  Flashing is something that you do rarely enough that it wouldn't be a huge inconvenience.

]]> Mon, 31 Aug 2015 13:13:41 +0000 https://www.soliforum.com/post/104547/#p104547 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/104539/#p104539 ecalistro87 wrote:

Hello, using a mac, solidoodle 4 with their board. went through almost all the steps but am stuck on step 29. I get bash: hid_bootloader_cli: command not found

BootloaderHID is build for windows, not osx, so it will not run http://blog.lincomatic.com/?p=548

Unfortunately I don't know the solution though - maybe someone here knows a different tool for osx you can use (printrbot firmware updater maybe?).

(WARDJR! YOU'RE UP! tongue)

]]> Mon, 31 Aug 2015 07:33:22 +0000 https://www.soliforum.com/post/104539/#p104539 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/104354/#p104354 Hello, using a mac, solidoodle 4 with their board. went through almost all the steps but am stuck on step 29. I get bash: hid_bootloader_cli: command not found

Any help would be greatly appreciated.

]]> Fri, 28 Aug 2015 07:04:48 +0000 https://www.soliforum.com/post/104354/#p104354 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/64401/#p64401 Excellent news! Any time. Happy printing! smile

]]> Mon, 25 Aug 2014 06:32:35 +0000 https://www.soliforum.com/post/64401/#p64401 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/64248/#p64248 Seems that once I manually input the parameters of the printer (per your suggestion), RH 1.0.3 recognized it by type and name.  Got manual control, and have started making test/calibration prints.  Thanks for your help!

]]> Sun, 24 Aug 2014 00:18:25 +0000 https://www.soliforum.com/post/64248/#p64248 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/64142/#p64142 Aaaaah.... I had this problem - make sure all your printer communication settings are as per the following wiki page: http://wiki.solidoodle.com/repetier-hos … on-windows
This is for an older version of RH, here are my settings (particularly make sure reset on connect is disabled):

Port: whatever your printer comes up as... Should appear if it's plugged into the computer. Try a few options if unsure! Mine is "COM10"

Baud Rate: 250000

Transfer Protocol: Autodetect

Reset on Connect: Disabled

Reset on Emergency: Send emergency command and reconnect

Receive Cache Size: 63

]]> Sat, 23 Aug 2014 00:44:59 +0000 https://www.soliforum.com/post/64142/#p64142 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/64139/#p64139 Thanks grob.  Got the latest RH last nite, liked the layout and options, but it would not recognize my bone-stock SD4...

]]> Sat, 23 Aug 2014 00:19:51 +0000 https://www.soliforum.com/post/64139/#p64139 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/64138/#p64138 wpmarsh wrote:

A follow-up question from a Noob:  after updating the firmware, will the latest Repetier Host recognize the printer?

Should work fine - make sure you've selected the right com port in RH (printer settings), and when you click 'connect' the log window should show the printer responding with it's firmware version etc.

]]> Sat, 23 Aug 2014 00:12:16 +0000 https://www.soliforum.com/post/64138/#p64138 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/64131/#p64131 A follow-up question from a Noob:  after updating the firmware, will the latest Repetier Host recognize the printer?

]]> Fri, 22 Aug 2014 22:58:32 +0000 https://www.soliforum.com/post/64131/#p64131 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/63984/#p63984 Good work! Glad you're doing well.
I found the hysteresis fix revolutionized the accuracy of my z-axis, and really improved first layer consistency. Get a dial gauge out and smash that 0.01mm barrier. smile

]]> Thu, 21 Aug 2014 02:50:46 +0000 https://www.soliforum.com/post/63984/#p63984 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/63979/#p63979 grob you just beat me to it.  I just finished reading that post.  I have now tried it, updated the hysteresis settings for the Y and i am blown away.  Finally moves correctly.  I cant wait to print something round and see what happens!  THANKS AGAIN TO
ALL WHO HELPED WITH THIS!

]]> Thu, 21 Aug 2014 02:17:44 +0000 https://www.soliforum.com/post/63979/#p63979 <![CDATA[Re: SD4 Firmware with Solidoodle board]]> https://www.soliforum.com/post/63976/#p63976 Re question 1:

I used lawsy's repo, and hysteresis correction runs well on mine. Pretty sure I didn't have to switch anything on. Not sure whether adrian's is any different in this regard.

The values are adjusted by M99 gcode instruction (I stick it in my start code), and read with M98. See the forum post for instructions.

http://www.soliforum.com/topic/313/hysteresis-fix/

I'd try typing M98 into RH gcode terminal and see if you get a response...

]]> Thu, 21 Aug 2014 01:55:58 +0000 https://www.soliforum.com/post/63976/#p63976