<![CDATA[SoliForum - 3D Printing Community — Infill is not regular]]> https://www.soliforum.com/topic/7333/infill-is-not-regular/ Sat, 16 Aug 2014 04:25:47 +0000 PunBB <![CDATA[Re: Infill is not regular]]> https://www.soliforum.com/post/63470/#p63470 Start out with .3 settings once you have that mastered migrate to .1 if you feel the need.
As far as settings go what have you done as far as calibrations go.  That should be your first priority.

]]> Sat, 16 Aug 2014 04:25:47 +0000 https://www.soliforum.com/post/63470/#p63470 <![CDATA[Re: Infill is not regular]]> https://www.soliforum.com/post/63469/#p63469 Hi thanks for your help.

What should be the correct setting in Slic3r? I use the 0.1mm default setting

]]> Sat, 16 Aug 2014 03:39:19 +0000 https://www.soliforum.com/post/63469/#p63469 <![CDATA[Re: Infill is not regular]]> https://www.soliforum.com/post/63398/#p63398 Or you have some serious moisture in your filament along with your clog.
Summer time is hard on filaments and it seems as though we see a lot of clogging of nozzles this time of year.
Coincidence.... I think not.  Either way clean out that nozzle as best you can and try and dry your filament.

]]> Fri, 15 Aug 2014 14:34:54 +0000 https://www.soliforum.com/post/63398/#p63398 <![CDATA[Re: Infill is not regular]]> https://www.soliforum.com/post/63397/#p63397 Sounds like you have a partial clog.
Are you sure the filament and nozzle settings in Slicer are correct?

]]> Fri, 15 Aug 2014 14:26:36 +0000 https://www.soliforum.com/post/63397/#p63397 <![CDATA[Infill is not regular]]> https://www.soliforum.com/post/63387/#p63387 Hi,

I try to print a large object on my SD2 Pro.
The first 20 layers are excellent and the perimeters too. But after 20 layers, the infill deposit is not regular and become messy.

I have attached a picture.

Thank you for your help

]]> Fri, 15 Aug 2014 12:43:16 +0000 https://www.soliforum.com/post/63387/#p63387