<![CDATA[SoliForum - 3D Printing Community — help sd3 not extruding]]> https://www.soliforum.com/topic/7006/help-sd3-not-extruding/ Fri, 18 Jul 2014 01:58:20 +0000 PunBB <![CDATA[Re: help sd3 not extruding]]> https://www.soliforum.com/post/60559/#p60559 nemesis200 wrote:

All the connections are made and tight. I'm thinking that the motor possibly died

That's possible but unlikely.  plug it into one of the other axis stepper drivers and tell that axis to move.  If the motor turns then your problem is elsewhere.

]]> Fri, 18 Jul 2014 01:58:20 +0000 https://www.soliforum.com/post/60559/#p60559 <![CDATA[Re: help sd3 not extruding]]> https://www.soliforum.com/post/60533/#p60533 All the connections are made and tight. I'm thinking that the motor possibly died

]]> Thu, 17 Jul 2014 20:28:52 +0000 https://www.soliforum.com/post/60533/#p60533 <![CDATA[Re: help sd3 not extruding]]> https://www.soliforum.com/post/60532/#p60532 My guess is to first trace the wire am make sure it is properly plugged into the board.

]]> Thu, 17 Jul 2014 20:14:59 +0000 https://www.soliforum.com/post/60532/#p60532 <![CDATA[help sd3 not extruding]]> https://www.soliforum.com/post/60530/#p60530 The  extruder stopped feeding  filament. All other functions work from repetier-host (v0.82b) (able to  move  in x,y, and z, heat print bed, and extruder) extruder at 195C  hit extrude or retract and nothing happens. motor not making nose or spinning at all

]]> Thu, 17 Jul 2014 19:55:56 +0000 https://www.soliforum.com/post/60530/#p60530