<![CDATA[SoliForum - 3D Printing Community — Solidoodle Y-Axis shifting during printing]]> https://www.soliforum.com/topic/6704/solidoodle-yaxis-shifting-during-printing/ Fri, 13 Jun 2014 11:56:46 +0000 PunBB <![CDATA[Re: Solidoodle Y-Axis shifting during printing]]> https://www.soliforum.com/post/58589/#p58589 I agree with the other posters as well as checking the belt tightness. They should not be to tight or to loose. I saw the same issue with mine. If you are not careful, the one side of the belts can be loose while the other seems too tight (same belt, other pulley).

]]> Fri, 13 Jun 2014 11:56:46 +0000 https://www.soliforum.com/post/58589/#p58589 <![CDATA[Re: Solidoodle Y-Axis shifting during printing]]> https://www.soliforum.com/post/58524/#p58524 Looks like it is skipping towards the back of the printer so the first thing I would check is that the filament spool is not binding as this is a main cause of prints shifting towards the back of the printer... but like ward says calibrate and lubricate smile

http://www.soliwiki.com/Main_Page#Calibrations

]]> Thu, 12 Jun 2014 16:50:36 +0000 https://www.soliforum.com/post/58524/#p58524 <![CDATA[Re: Solidoodle Y-Axis shifting during printing]]> https://www.soliforum.com/post/58468/#p58468 There are a lot of posts about axis skipping so have a search.
Cool the electronics and the motor if it's getting hot.
Adjust the VREF's
Most important calibrate and lubricate... Most times something is misaligned or binding.

]]> Wed, 11 Jun 2014 20:53:18 +0000 https://www.soliforum.com/post/58468/#p58468 <![CDATA[Solidoodle Y-Axis shifting during printing]]> https://www.soliforum.com/post/58465/#p58465 Hi,
I have an issue with the y-axis shifting during the print - I tried the adjustments suggested by customer care (with partial success). Wondered if anyone else had successfully found a way of fixing this? Thanks in advance. Al

]]> Wed, 11 Jun 2014 19:52:06 +0000 https://www.soliforum.com/post/58465/#p58465