<![CDATA[SoliForum - 3D Printing Community — Some questions on printer.]]> https://www.soliforum.com/topic/6604/some-questions-on-printer/ Mon, 02 Jun 2014 03:27:16 +0000 PunBB <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57703/#p57703 Ok second time trying i reduced the heat but now im getting error 0011.

edit* did a different temp and it works now. But my extruder still very high. I followed someone elses settings on here but i dont know whats going on.

]]> Mon, 02 Jun 2014 03:27:16 +0000 https://www.soliforum.com/post/57703/#p57703 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57695/#p57695 Tried it again, and your correct. The only thing just seems my slicer settings are still not correct. My extruder seems to be to high when printing.

edite*Also it seems that the settings started to burn the filament for the nylon. Anyone know a safe bed and extruder temp for nylon

]]> Mon, 02 Jun 2014 02:14:23 +0000 https://www.soliforum.com/post/57695/#p57695 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57688/#p57688 Mine came with E, So ima try one more time on that note. I just looked at someones slicer settings. Going to try to print something.

]]> Mon, 02 Jun 2014 01:43:26 +0000 https://www.soliforum.com/post/57688/#p57688 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57686/#p57686 deathfinderxx wrote:

I believe I am setting up my setting for slic3r incorrectly. Can anyone show me the correct settings, and I do not think i have the correct heading either. So if the gcode is set to 255c it shouldn't worry? I heard if i did it would stop and cool down to what the cart says and be infinite loop of going up and down in temps.

Let me say also that I never upgraded from the 'G' firmware once the cart reset was working.

]]> Mon, 02 Jun 2014 01:36:22 +0000 https://www.soliforum.com/post/57686/#p57686 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57684/#p57684 I believe I am setting up my setting for slic3r incorrectly. Can anyone show me the correct settings, and I do not think i have the correct heading either. So if the gcode is set to 255c it shouldn't worry? I heard if i did it would stop and cool down to what the cart says and be infinite loop of going up and down in temps.

]]> Mon, 02 Jun 2014 01:12:57 +0000 https://www.soliforum.com/post/57684/#p57684 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57672/#p57672 deathfinderxx wrote:

Tried, Since I do not have a resetting for the cartridge, it max sets at 215c. Also I am having alot of trouble understanding the slic3r conversion. My cartridge or my printer is glitched and it does not decline in the measurement of the spool. It still says I have 120m out of 120m on my cartridge O.o.

Hmmm, when I was still using the stock firmware I reset my cart but left the temp at 215 and the printer would heat to 215C, the firmware would start it's auto routines but when the G Code started the printer would wait for the temp to hit 230C (my slic3r setting).

Make sure you're using M109 (Set Extruder Temperature and Wait) as the G Code command in your starting script. This will insure the printer waits for the temp to be reached before actually starting the print.

]]> Mon, 02 Jun 2014 00:36:24 +0000 https://www.soliforum.com/post/57672/#p57672 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57663/#p57663 deathfinderxx - ok, if you do, dont forget to report back with your dump. good luck!

Jin - Thanks for version E! where did you get it from? cheers!

]]> Sun, 01 Jun 2014 23:54:20 +0000 https://www.soliforum.com/post/57663/#p57663 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57661/#p57661 1.1.E firmware

set your gcode file

; total_filament = 0

and your filament count wont drop

]]> Sun, 01 Jun 2014 23:51:09 +0000 https://www.soliforum.com/post/57661/#p57661 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57659/#p57659 I would love too, I just need to some how get ahold of a arduino uno.

]]> Sun, 01 Jun 2014 23:45:49 +0000 https://www.soliforum.com/post/57659/#p57659 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57658/#p57658 deathfinderxx - Could you follow this thread on how to dump your cartridge eeprom?
http://voltivo.com/forum/davinci-filame … to-what-to

If you manage, could you post your dump here, so others can analyse it and see if there is some glitch than can be taken advantage of?

cheers

]]> Sun, 01 Jun 2014 23:23:56 +0000 https://www.soliforum.com/post/57658/#p57658 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57649/#p57649 Tried, Since I do not have a resetting for the cartridge, it max sets at 215c. Also I am having alot of trouble understanding the slic3r conversion. My cartridge or my printer is glitched and it does not decline in the measurement of the spool. It still says I have 120m out of 120m on my cartridge O.o.

]]> Sun, 01 Jun 2014 22:25:00 +0000 https://www.soliforum.com/post/57649/#p57649 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57642/#p57642 Use slic3r and set temps manually in slic3r or the gcode itself

]]> Sun, 01 Jun 2014 21:58:17 +0000 https://www.soliforum.com/post/57642/#p57642 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57640/#p57640 Its definitally not hot enough. Its temp max on the extruder is 215c  I need it to be atleast hitting 245-250c. Is there anyway to get this done without doing the reset on the actual cartridge? My cartridge is bugged so I dont need to reset it, but I need to change the temp.

]]> Sun, 01 Jun 2014 21:28:01 +0000 https://www.soliforum.com/post/57640/#p57640 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57632/#p57632 It came with it when I purchased. I can try.
Additionally I went to walmart and bought some .065''x100' premium 5 sided trimmer line. Product code 579166501. I tried using it as a substitute and It printed, BUT when I removed the item, the layers just fell apart. Was the print head not hot enough?

]]> Sun, 01 Jun 2014 20:43:32 +0000 https://www.soliforum.com/post/57632/#p57632 <![CDATA[Re: Some questions on printer.]]> https://www.soliforum.com/post/57627/#p57627 How did you install version E?
Automatically or manually?
Do you still have the firmware file?
In any case, if you could get access to your SD card, could you please copy any .DAT files off it, zip and post them here?

Thanks

]]> Sun, 01 Jun 2014 20:27:55 +0000 https://www.soliforum.com/post/57627/#p57627