<![CDATA[SoliForum - 3D Printing Community — How to treat shallow curvature cases?]]> https://www.soliforum.com/topic/648/how-to-treat-shallow-curvature-cases/ Wed, 16 Jan 2013 19:51:30 +0000 PunBB <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/9652/#p9652 I used to serve a drink called the hidden mickey back in the day.

I kid I kid

]]> Wed, 16 Jan 2013 19:51:30 +0000 https://www.soliforum.com/post/9652/#p9652 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/9645/#p9645 We always referred to such as "hidden Mickeys" at the park when I worked there.  The trick was to look for the three circles in the attractions to see where a Disney Imagineer had hidden the reference.  It turned into quite a game and you can find them in the most innovative of places.
o  o
  O

]]> Wed, 16 Jan 2013 19:23:13 +0000 https://www.soliforum.com/post/9645/#p9645 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/9640/#p9640 I never said it was a Mickey head, but you might not be wrong smile  I doubt Disney has ever heard of Thingiverse, and might not ever run across something there like looks like a copy of their logo for Disney Quest.

]]> Wed, 16 Jan 2013 18:26:55 +0000 https://www.soliforum.com/post/9640/#p9640 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/9634/#p9634 Mickey head... or for those not so Disney inclined, mouse head.

Still, a nice design for soap 'specially for kids.

]]> Wed, 16 Jan 2013 17:51:10 +0000 https://www.soliforum.com/post/9634/#p9634 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/9601/#p9601 Ian, is that an Airbender symbol? Awesome!

]]> Wed, 16 Jan 2013 15:13:25 +0000 https://www.soliforum.com/post/9601/#p9601 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/5737/#p5737 Excellet, I'm going to give it a try.

]]> Tue, 27 Nov 2012 20:38:02 +0000 https://www.soliforum.com/post/5737/#p5737 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/5730/#p5730 I would keep the temperature constant, because I don't know if it would keep going during a temp change, or pause.  Otherwise anything goes.  Only do it this way for Slic3r.  Skeinforge gcode is more complicated due to the way it handles extruder coordinates.  It might back the filament all the way out, or cram 10mm of filament into a short move. 

If merging Slic3r gcodes causes the extruder to misbehave at the splice, try checking the Relative checkbox in printer settings.

]]> Tue, 27 Nov 2012 20:03:22 +0000 https://www.soliforum.com/post/5730/#p5730 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/5711/#p5711 Wow, that's a really cool solution. Are there any specific settings one need to keep constant when splicing G-code? Or is it pretty much anything goes?

]]> Tue, 27 Nov 2012 19:00:27 +0000 https://www.soliforum.com/post/5711/#p5711 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/5710/#p5710 nice trick !
this sounds like a job for a python script.

]]> Tue, 27 Nov 2012 18:57:39 +0000 https://www.soliforum.com/post/5710/#p5710 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/5703/#p5703 Print at .1mm layers, and add a lot more perimeters.  It will really slow things down having a lot of perimeters for the whole model, so you can slice it twice using different settings, then join the gcode.

I describe how to do this in a Thingiverse post- http://www.thingiverse.com/thing:22441

The Bar print needs a lot of perimeters to keep from getting gaps in the fillet on top. The curve gets so gradual that the outer radius for one layer might be more than a thread width shorter than the layer below it. I used 5 perimeters and 4 solid layers to make sure that the surface was thick enough through the curve to prevent gaps and stand up to sanding.

I didn't want to print the entire thing with that many perimeters. Instead I sliced it at .3 layer height, 3 perimeters, 2 solids and .1 infill for the base. Then I sliced it again with .2 layer height, 3 perimeters, .1 infill for the sides, and again with .2 layer height, 5 perimeters, 4 solids and .3 infill for the top.

To merge the gcodes, I searched for "G1 Z3" in the middle gcode, and copied everything after that point. Then I pasted it over everything after the inital "G1 Z3" in the base Gcode. This made it change to the middle settings at 3mm into the print. I did the same thing with the top Gcode, starting at around "G1 Z25"

The bar print then, starts with .3 layer height for the first 3mm to give the print a chance to level out before changing to .2 layers, for a smoother surface on the sides. At 25mm it changes to 5 perimeters with a denser infill to support the solid layers on the top.

You could slice most of the model at .3mm layers, then have it change to .1mm just for the top.

]]> Tue, 27 Nov 2012 17:52:13 +0000 https://www.soliforum.com/post/5703/#p5703 <![CDATA[Re: How to treat shallow curvature cases?]]> https://www.soliforum.com/post/5699/#p5699 Sand it down after the print

]]> Tue, 27 Nov 2012 17:20:07 +0000 https://www.soliforum.com/post/5699/#p5699 <![CDATA[How to treat shallow curvature cases?]]> https://www.soliforum.com/post/5694/#p5694 I'm having trouble getting passable results when I have shallow curvatures on the top or bottom portions of the object.
Attached is a generic example and the Slic3r generated code from the top of the curvature.
Is there anything I can do about it besides printing at a higher resolution?

]]> Tue, 27 Nov 2012 16:49:31 +0000 https://www.soliforum.com/post/5694/#p5694