<![CDATA[SoliForum - 3D Printing Community — New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/topic/6029/new-to-3d-printing-need-some-helpadvice-starting-out-please/ Mon, 16 Jun 2014 13:11:57 +0000 PunBB <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/58729/#p58729 Most 3d printer can manage a few hundred of print time without any big maintenance of the printer. Mostly what you need to change is the fan for few dollars, change the extruders maybe after 600 hours (maybe around 80 dollars) and the heat bed.

For regular maintenance I recommend that you, after each print, clean the print tray so it becomes scraped clear of any residual material. Once the print tray is clean, you can use some  rubbing alcohol with paper and clean it.

Voila and there u have it a machine that hold x year longer than normal >)

]]> Mon, 16 Jun 2014 13:11:57 +0000 https://www.soliforum.com/post/58729/#p58729 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54162/#p54162 The main thing would be just like the SD printers, level the bed and set the z height(you can do this with the bed leveling screws) Since the electronics are sanguinololu the adjustments are the same as SD printers for everything else like extrusion steps and x, Y, and Z axis steps

One other thing I was going through the assembly manual for the eventorbot --> http://eventorbot.com/files/Eventorbot% … 0guide.zip and I see it has a geared stepper for the extruder.. so my post about the moire being worse for 3mm while technically true wouldn't be as bad as I first indicated but would still be 3 times worse than 1.75mm filament.

]]> Mon, 14 Apr 2014 04:39:55 +0000 https://www.soliforum.com/post/54162/#p54162 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54158/#p54158 One last question: How would I calibrate the printer? I can't seem to find instructions for calibrating the Eventorbot.... The guy I bought it from said it would need to be recalibrated as it may have shifted around a bit during shipping.

]]> Mon, 14 Apr 2014 03:18:58 +0000 https://www.soliforum.com/post/54158/#p54158 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54105/#p54105 wardjr wrote:

I can't help you with that but if I get a vote I would say sell or toss the 3mm.

I'll definitely try to sell them and get 1.75mm with the money I got from the 3mm, thanks for the advice!

ronsii wrote:

From what I can tell there should be some thread stickout.... Are you sure the threads were not visible before.... anywhichway you will probably have to do any thread work with the hotend up to temperature because the filament usually glues everything together once it has been used.

Oh, awesome! Thanks! And now that I think about it, the threads may have been visible before but I might have not paid attention to the hot end piece until after I tried messing with it. That would make sense though, because it's impossible to screw in without breaking the wires... Thanks!

]]> Sun, 13 Apr 2014 04:40:47 +0000 https://www.soliforum.com/post/54105/#p54105 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54074/#p54074 Hi 152, Found the specs for the hotend on the EB 1.2 -->http://eventorbot.com/files/Diagram%20for%20hotend.zip From what I can tell there should be some thread stickout.... Are you sure the threads were not visible before.... anywhichway you will probably have to do any thread work with the hotend up to temperature because the filament usually glues everything together once it has been used.

]]> Sat, 12 Apr 2014 05:40:53 +0000 https://www.soliforum.com/post/54074/#p54074 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54066/#p54066 OneFiveTwo wrote:

Hmm, I did not know that! Maybe I should get the 1.75mm then... but I still have the problem of the hot end part sticking out... Anyways, 2 spools of 3mm ABS plastic came with the printer so that is why I'm asking for advice on how to change it and how to screw it back in, because I never unscrewed it.

I can't help you with that but if I get a vote I would say sell or toss the 3mm.

]]> Sat, 12 Apr 2014 04:32:43 +0000 https://www.soliforum.com/post/54066/#p54066 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54052/#p54052 One of the problems with using 3mm filament on a 1.75 system is you will get more 'moire' effect because for every step of the extruder stepper you will get almost three times as much filament coming out of the nozzle.

]]> Sat, 12 Apr 2014 02:34:40 +0000 https://www.soliforum.com/post/54052/#p54052 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54040/#p54040 Hmm, I did not know that! Maybe I should get the 1.75mm then... but I still have the problem of the hot end part sticking out... Anyways, 2 spools of 3mm ABS plastic came with the printer so that is why I'm asking for advice on how to change it and how to screw it back in, because I never unscrewed it.

]]> Sat, 12 Apr 2014 00:51:14 +0000 https://www.soliforum.com/post/54040/#p54040 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54024/#p54024 May I ask why you want to switch to 3mm filament?  1.75 is kind of the new norm.

]]> Fri, 11 Apr 2014 21:47:45 +0000 https://www.soliforum.com/post/54024/#p54024 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/54010/#p54010 Alright, so I got my printer last Friday and haven't been able to mess with it until last night. However, there is a problem, because the guy who sold it to me had the 1.75mm filament insert installed and I do not know how to change it. He told me to try to take off the cable from on top of the hot end and one of the white tubes that came in the package should be a 3mm insert.

Last night, I tried taking off the cord, but it's very difficult and when I looked at the hot end itself, it seemed like it was popping out; the threads were now visible. I want to fix it, but don't know how, and I definitely don't want to do anything further to it as I'm scared I might break it.

Can anyone please enlighten me on this subject? I would appreciate it greatly! I've included pictures in order to help explain the situation.

Thank you!

]]> Fri, 11 Apr 2014 19:02:37 +0000 https://www.soliforum.com/post/54010/#p54010 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/53334/#p53334 Yep, Have fun and let us know how it's going or if we can help.  Lots of really sharp people here on the forum.

]]> Tue, 01 Apr 2014 16:38:21 +0000 https://www.soliforum.com/post/53334/#p53334 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/53332/#p53332 Thanks!
I  also bought it completely assembled with a few upgrades as well.  Thanks for the link as well!

]]> Tue, 01 Apr 2014 16:19:37 +0000 https://www.soliforum.com/post/53332/#p53332 <![CDATA[Re: New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/53327/#p53327 Welcome to the forum....
Did you get a fully assembled version or a kit?
Most users here use Repetier-Host  http://www.repetier.com/
And Slic3r http://slic3r.org/
You should check out the WIKI it is very informative although some of the info is out of date. http://www.soliwiki.com/

]]> Tue, 01 Apr 2014 14:49:39 +0000 https://www.soliforum.com/post/53327/#p53327 <![CDATA[New to 3D printing! Need some help/advice starting out please!]]> https://www.soliforum.com/post/53317/#p53317 So I recently bought a 3D printer. The Eventorbot 1.2 to be exact. It's all so confusing yet also exciting! I'm wondering a lot of things. For starters, what should I be looking for when it comes to the 3D printing software? Also, What should be some key things in printing and/or maintaining the printer?

]]> Tue, 01 Apr 2014 04:20:10 +0000 https://www.soliforum.com/post/53317/#p53317