<![CDATA[SoliForum - 3D Printing Community — extruder crashes on print end with with repetier]]> https://www.soliforum.com/topic/5969/extruder-crashes-on-print-end-with-with-repetier/ Wed, 26 Mar 2014 19:40:38 +0000 PunBB <![CDATA[Re: extruder crashes on print end with with repetier]]> https://www.soliforum.com/post/53015/#p53015 I have found the culprit setting in Printer Settings:  Go to Park position after job/kill.

I have used solidoodle's settings (no upgrades to my printer firmware), and somehow the thing subtracts 159 from the Park value in the X coordinate.  I disabled the parking for the time being, but I haven't decided what values I should use to be sure that my extruder won't crash.

]]> Wed, 26 Mar 2014 19:40:38 +0000 https://www.soliforum.com/post/53015/#p53015 <![CDATA[Re: extruder crashes on print end with with repetier]]> https://www.soliforum.com/post/52951/#p52951 Checked.  Not there.  And not in any of the number scripts, or anything in that menu.

]]> Tue, 25 Mar 2014 22:37:29 +0000 https://www.soliforum.com/post/52951/#p52951 <![CDATA[Re: extruder crashes on print end with with repetier]]> https://www.soliforum.com/post/52950/#p52950 Repetier has its own End Code tab in the gcode window.  Maybe it ended up in there somehow.

]]> Tue, 25 Mar 2014 22:35:10 +0000 https://www.soliforum.com/post/52950/#p52950 <![CDATA[extruder crashes on print end with with repetier]]> https://www.soliforum.com/post/52948/#p52948 I have a new install of repetier host on windows, and at the end of a calibration print, sliced with slic3r in repetier, the extruder does
G1 X-9 Y0 F4800

Crashes briefly, and then the motors turn off.  The end of the print, including that command, are pasted below.

I can't find this command in my start or end code (which I have not modified), and I think my printer settings are either untouched, or I made sure they are copied from the solidoodle website recommendations.  I just don't know where that command came from!

...
19:35:51.390 : N4934 G1 X67.211 Y77.117 E5.46445 *126
19:35:51.437 : ok
19:35:51.437 : N4935 G1 E2.96445 F9000 *31
19:35:51.437 : N4936 G92 E0 *95
19:35:51.437 : N4937 M107 *60
19:35:51.515 : ok
19:35:51.515 : N4938 G28 X159 Y150 *13
19:35:51.562 : ok
19:35:51.562 : ok
19:35:51.562 : N4939 G91 *6
19:35:51.562 : N4940 G1 Z50 F50 *45
19:35:57.203 : ok
19:35:57.203 : ok
19:35:57.203 : ok
19:35:57.203 : Printjob finished at 3/24/2014 7:35 PM
19:35:57.203 : Printing Time:2m:47s
19:35:57.203 : Lines Send:1579
19:35:57.234 : N4942 G90 *11
19:35:57.234 : N4943 M104 T0 S0 *59
19:35:57.234 : ok T:195.9 /195.0 B:74.1 /75.0 @:86
19:35:57.234 : ok
19:35:57.234 : N4944 G1 X-9 Y0 F4800 *122
19:35:57.234 : N4945 M84 *3
19:35:57.234 : ok
...

Is this a common problem?  What is the solution?

]]> Tue, 25 Mar 2014 22:12:55 +0000 https://www.soliforum.com/post/52948/#p52948