<![CDATA[SoliForum - 3D Printing Community — Damaged peek insulator pipe]]> https://www.soliforum.com/topic/5958/damaged-peek-insulator-pipe/ Tue, 25 Mar 2014 15:45:52 +0000 PunBB <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52919/#p52919 Sorry about that for some reason I couldn't open those earlier.  I thought they were bad links, it ended up being on my end.

elmoret wrote:

Look in the OP...

]]> Tue, 25 Mar 2014 15:45:52 +0000 https://www.soliforum.com/post/52919/#p52919 <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52918/#p52918 Look in the OP...

]]> Tue, 25 Mar 2014 15:32:48 +0000 https://www.soliforum.com/post/52918/#p52918 <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52908/#p52908 elmoret wrote:

It looks like Solidoodle is no longer using the standard groove mount? Yikes.

So what are they using?  Got a photo or a link?  More importantly... What are they thinking!!!

]]> Tue, 25 Mar 2014 14:43:20 +0000 https://www.soliforum.com/post/52908/#p52908 <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52897/#p52897 It looks like Solidoodle is no longer using the standard groove mount? Yikes.

]]> Tue, 25 Mar 2014 13:56:19 +0000 https://www.soliforum.com/post/52897/#p52897 <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52895/#p52895 Qvims wrote:

My extruder jamed pretty bad during a print, and I am noticed that the white plastic guide inside the peek insulator pipe had popped out a little. basically the guide the filament first goes trough. have anybody experienced this before? how do I fix it? at this point the peek barrel jams constantly because the white guide is loose and jumps up out of the barrel creating a cap that fills with abs.

Also, solidoodle dose not sell a new peek barrel for the solidoodle 4(new extruder)


I sent you a PM. We should be able to get you a  replacement.

]]> Tue, 25 Mar 2014 13:49:17 +0000 https://www.soliforum.com/post/52895/#p52895 <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52884/#p52884 You do have to make/modify some components to fit the E3D it is not quite a bolt-in swap... It's also not that hard smile there are some great threads here on how to do it.

Start here ---> http://www.soliwiki.com/E3D_extruder

]]> Tue, 25 Mar 2014 06:13:22 +0000 https://www.soliforum.com/post/52884/#p52884 <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52881/#p52881 wardjr wrote:

Buy an E3D or other all metal hot end and be done with all the problems that go along with standard hot ends.

is it a buy and install type of thing?
or is it more involved then that?

for reference I have a stock SD3, with acrylic jigsaw type head.

]]> Tue, 25 Mar 2014 05:21:59 +0000 https://www.soliforum.com/post/52881/#p52881 <![CDATA[Re: Damaged peek insulator pipe]]> https://www.soliforum.com/post/52869/#p52869 Buy an E3D or other all metal hot end and be done with all the problems that go along with standard hot ends.

]]> Tue, 25 Mar 2014 02:25:46 +0000 https://www.soliforum.com/post/52869/#p52869 <![CDATA[Damaged peek insulator pipe]]> https://www.soliforum.com/post/52866/#p52866 My extruder jamed pretty bad during a print, and I am noticed that the white plastic guide inside the peek insulator pipe had popped out a little. basically the guide the filament first goes trough. have anybody experienced this before? how do I fix it? at this point the peek barrel jams constantly because the white guide is loose and jumps up out of the barrel creating a cap that fills with abs.

Also, solidoodle dose not sell a new peek barrel for the solidoodle 4(new extruder)

]]> Tue, 25 Mar 2014 01:29:15 +0000 https://www.soliforum.com/post/52866/#p52866