<![CDATA[SoliForum - 3D Printing Community — Help please.]]> https://www.soliforum.com/topic/5954/help-please/ Mon, 24 Mar 2014 23:44:07 +0000 PunBB <![CDATA[Re: Help please.]]> https://www.soliforum.com/post/52858/#p52858 Ok sorry for that.  I didn't scroll down far enough, yes an ID 10 T error on my part.  Thank you for responding so quickly.

Ken

]]> Mon, 24 Mar 2014 23:44:07 +0000 https://www.soliforum.com/post/52858/#p52858 <![CDATA[Re: Help please.]]> https://www.soliforum.com/post/52809/#p52809 It comes with a letter that provides a link to the written instructions. This is done so I can update instructions on the fly, making for a better end-user experience.

Figure 1 in the wiring diagram shows how to do the wiring, and it has step by step directions below.

No SSR is needed, the controller has a conventional relay on board.

Let me know if you have specific questions.

]]> Mon, 24 Mar 2014 13:10:26 +0000 https://www.soliforum.com/post/52809/#p52809 <![CDATA[Help please.]]> https://www.soliforum.com/post/52808/#p52808 Hi we received our filastruder number 966.  There are no written instructions per say, but found the online instructions which are helpful to a degree.  The kit came with the Sestos d1s-2r-24 pid.  I can't find any references to wiring it.  I've wired other controllers with other extruders including one I made myself, so not a complete moron here.  Please, any help will be appreciated.  I also note that it did not come with an ssr which my others have. 

Thank you
Ken

]]> Mon, 24 Mar 2014 12:49:45 +0000 https://www.soliforum.com/post/52808/#p52808