<![CDATA[SoliForum - 3D Printing Community — New Extruder]]> https://www.soliforum.com/topic/5853/new-extruder/ Tue, 18 Mar 2014 01:20:44 +0000 PunBB <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52350/#p52350 Oh nice... I'll take a look, though I may not get time to print it until the weekend.

Thanks!

]]> Tue, 18 Mar 2014 01:20:44 +0000 https://www.soliforum.com/post/52350/#p52350 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52332/#p52332 I don't mean to derail the thread, but I can make a modified version for anyone to try.

I typically like to test my designs before uploading them so that no one wastes filament, but I discovered the other day that adding countersinks should be possible if I move the carriage mount holes over by 1mm.

If you'd like to give it a shot for me, I'd be glad to upload the file for you to try.  You should only have to reprint that one part (the bottom), and all of the other pieces should work just fine with it.  Let me know, and I'll work on getting it ready to be printed.

edit: The carriage bolts are pan heads aren't they?  I think they should have a 6mm head OD.

edit2: Attached the file for anyone interested.

]]> Mon, 17 Mar 2014 19:14:10 +0000 https://www.soliforum.com/post/52332/#p52332 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52326/#p52326 creiht wrote:

  I drilled out and counter sunk the mounting holes so that I could use the stock bolts going through from the front, with nuts in the back.

Didn't even think of that hmm

]]> Mon, 17 Mar 2014 18:05:14 +0000 https://www.soliforum.com/post/52326/#p52326 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52322/#p52322 I started with the MK5, but was a little disappointed with the E3D fit.  I'm now using Bozs and it holds the E3D *very* securely.  I drilled out and counter sunk the mounting holes so that I could use the stock bolts going through from the front, with nuts in the back.   I've provided the feedback to Boz, and hopefully will get an updated version.

]]> Mon, 17 Mar 2014 16:16:18 +0000 https://www.soliforum.com/post/52322/#p52322 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52313/#p52313 I love this design, but the carriage bolts either need to be shaved down approximately 40mm, or find a set of 4-40x60mm bolts.
Since i like the ability to switch between extruders as I please, this creates an issue since I cannot find these bolts anywhere in store. However, a series of washers and aluminum spacers should work. E3D is a very tight fit.
Lawsy's mk5 or Boz's REV series are the way to go. Bare in mind that Boz's design will not work with the stock hot end...only an E3D. So mk5 is your best bet for now.

]]> Mon, 17 Mar 2014 15:35:32 +0000 https://www.soliforum.com/post/52313/#p52313 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52211/#p52211 Wow.. nice work....

but damn that contraption makes me like the Bulldog even more smile (Now only $149 for the XL - and 100 times better than the stock extruder new or old.....)

]]> Sun, 16 Mar 2014 07:43:56 +0000 https://www.soliforum.com/post/52211/#p52211 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52202/#p52202 Boz has a new derivative now too:

http://www.thingiverse.com/thing:271506

http://thingiverse-production.s3.amazonaws.com/renders/18/81/b9/4a/63/e3drevb3_preview_featured.jpg

]]> Sun, 16 Mar 2014 05:02:06 +0000 https://www.soliforum.com/post/52202/#p52202 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52197/#p52197 elmoret wrote:

Lawsy MK5.

+1. You'll not get anything better for the price (since you print it yourself).

It'll handle the E3D too, when you're ready to upgrade.

]]> Sun, 16 Mar 2014 03:10:41 +0000 https://www.soliforum.com/post/52197/#p52197 <![CDATA[Re: New Extruder]]> https://www.soliforum.com/post/52196/#p52196 Lawsy MK5.

]]> Sun, 16 Mar 2014 02:57:26 +0000 https://www.soliforum.com/post/52196/#p52196 <![CDATA[New Extruder]]> https://www.soliforum.com/post/52187/#p52187 After just repairing my SD2 after a major filament blockage, I decided I really don't want to have to take the jigsaw apart again.  If you were going to print a replacement extruder, which one would you use? 

Eventually, I would like to consider an E3D replacement, but that is down the road a piece...
Got sum learnin' and 'sperimentin' to do first. 

TIA
Ski

]]> Sat, 15 Mar 2014 23:09:31 +0000 https://www.soliforum.com/post/52187/#p52187