<![CDATA[SoliForum - 3D Printing Community — Repetier-Host V0.95F]]> https://www.soliforum.com/topic/5758/repetierhost-v095f/ Thu, 01 May 2014 17:34:00 +0000 PunBB <![CDATA[Re: Repetier-Host V0.95F]]> https://www.soliforum.com/post/55456/#p55456 I know this is an old threat but Brettski15 fixed my problem. How bizarre! Thanks again!

]]> Thu, 01 May 2014 17:34:00 +0000 https://www.soliforum.com/post/55456/#p55456 <![CDATA[Re: Repetier-Host V0.95F]]> https://www.soliforum.com/post/52534/#p52534 Ok I had the same problem as you.  What i figured out to do is go into the manual control.  Click on the ok button down by the debug options.  The  I homed my extruder.  This is the only way i can get it to work.  Weird right.  I just got a new computer with win 8 and it was a mess hooking up my sd2 up to it.  Got it figured out though. Good luck to you.

]]> Thu, 20 Mar 2014 00:33:32 +0000 https://www.soliforum.com/post/52534/#p52534 <![CDATA[Re: Repetier-Host V0.95F]]> https://www.soliforum.com/post/51522/#p51522 Running windows 8 64bit. Will try changing "Reset to Connect" --> "Disabled" tomorrow and check to see if I can heat the extruder/bed

]]> Thu, 06 Mar 2014 05:52:57 +0000 https://www.soliforum.com/post/51522/#p51522 <![CDATA[Re: Repetier-Host V0.95F]]> https://www.soliforum.com/post/51521/#p51521 Can you heat the extruder and bed?

]]> Thu, 06 Mar 2014 04:51:17 +0000 https://www.soliforum.com/post/51521/#p51521 <![CDATA[Re: Repetier-Host V0.95F]]> https://www.soliforum.com/post/51512/#p51512 Here's my .95F settings:

CONNECTION
Baud Rate: 115200
Transfer Protocol: Autodetect
Reset on Connect: Disabled
Reset on Emergency: Send emergency command and reconnect
Receive Cache Size: 127
Use Ping-Pong Communication: unchecked

PRINTER SHAPE
Printer Type: Classic Printer

]]> Thu, 06 Mar 2014 01:14:06 +0000 https://www.soliforum.com/post/51512/#p51512 <![CDATA[Re: Repetier-Host V0.95F]]> https://www.soliforum.com/post/51509/#p51509 What OS are you running?

I've seen changing "RESET on CONNECT" to DISABLED has helped others.

]]> Thu, 06 Mar 2014 00:24:54 +0000 https://www.soliforum.com/post/51509/#p51509 <![CDATA[Re: Repetier-Host V0.95F]]> https://www.soliforum.com/post/51493/#p51493 Any messages in the log?

]]> Wed, 05 Mar 2014 20:25:55 +0000 https://www.soliforum.com/post/51493/#p51493 <![CDATA[Repetier-Host V0.95F]]> https://www.soliforum.com/post/51490/#p51490 Hello All,
Wanted to upgrade to the newest Repetier-Host software for the improved UI, but can't seem to get my printer to communicate.

Correct Com port
Baud: 250000
Transfer Proto: Auto
Reset on Connect: DRT low-->high-->low
Reset on Emergency: Send emergency command and reconnect
Receive Cache Size: 127
Use ping-pong communication: unchecked.

Printer Type: Classic Printer
everything set to 150mm

Click connect, takes a few seconds and turns green. but when I try to give a manual command, it goes "#" Command Waiting.

HELP!

-Ryan

]]> Wed, 05 Mar 2014 19:53:48 +0000 https://www.soliforum.com/post/51490/#p51490