SoliForum - 3D Printing Community — Halo armament prints

Re: Halo armament prints

null@example.com (wire10ga) — Sun, 17 Aug 2014 15:32:56 +0000

Always impressed with your work. Thanks for sharing.

Re: Halo armament prints

null@example.com (Serin) — Sun, 17 Aug 2014 08:25:47 +0000

Thanks!
Yeah sure,
I tend to just abuse my prints with automotive spray filler-primer, then perhaps a touch of bondo where it's needed, like on warped edges or glitches in the perimeters.
Then I usually go over the large surfaces with my orbital sander, and then the smaller detailed parts with a set of small files and sand paper.
The trick I've found is to add a layer or two to the final product. In most cases parts come out needing to look a bit less anaemic(?).

The painted battle rifle in the back there has perhaps 4-6 coats of filler on it just to even it out and create a solid feel to the finish.
It's probably not as necessary with the more expensive printers, but with the Z wobble we all experience I've found that a lot of work needs to go into fixing it up.

This guys thread details the process extremely well: http://www.405th.com/showthread.php/416 … dler-Build

Re: Halo armament prints

null@example.com (PheonixSD3) — Sun, 17 Aug 2014 07:32:08 +0000

Those look really fantastic! I would love to take on a project like that sometime. Would you care to share some of your finishing and detail work secrets?

Re: Halo armament prints

null@example.com (Serin) — Sun, 17 Aug 2014 05:56:48 +0000

Well... Now seems like a good time to resurrect this thread..

Behold! A monument to unfinished print projects!
Oh, and a Filastruder that is still awaiting ammunition.

Re: Halo armament prints

null@example.com (Serin) — Sat, 31 May 2014 11:42:36 +0000

It begins....
As you might notice it's been revised some what.

Re: Halo armament prints

null@example.com (Ggalisky) — Wed, 21 May 2014 17:17:19 +0000

Wow that's really cool good luck with the neodymium magnet setup. If your looking for magnet k and j magnetic has a good selection.

Re: Halo armament prints

null@example.com (Serin) — Wed, 21 May 2014 03:14:39 +0000

No need to be sorry dude! :S
That looks awesome so far!

Re: Halo armament prints

null@example.com (envisaged) — Tue, 20 May 2014 19:57:51 +0000

Sorry Serin, been working on painting the lightsaber which I have posted about in here earlier

I have only printed the first two parts of the scattershot so far, although the third is printing as I type, have attached a quick iPhone pic of them

Re: Halo armament prints

null@example.com (Serin) — Wed, 14 May 2014 09:26:21 +0000

envisaged wrote:

part way through a scattershot, but other stuff keeps cropping up and stopping me from finishing it ;o)

Awesome! Please do post some pix if you get the chance

Re: Halo armament prints

null@example.com (envisaged) — Wed, 14 May 2014 09:15:28 +0000

part way through a scattershot, but other stuff keeps cropping up and stopping me from finishing it ;o)

Re: Halo armament prints

null@example.com (Serin) — Wed, 14 May 2014 04:45:48 +0000

Next up in the Halo series: The Halo 4 Boltshot

The idea is to mimic the way that the weapon assembles in-game when it's picked up by the player.
I'll be slotting Neodymium magnets into the individual parts to hold them together and allow for disassembly.
This will act as a bit of a test-bed for doing the whole Light-rifle above in a similar way.

Re: Halo armament prints

null@example.com (Antron007) — Fri, 02 May 2014 00:57:40 +0000

I used to have all kinds of ABS sticking/curling/peeling problems. I too have to have the bed at 110. I also have a mirror with painters tape on it. And the key ingredient is glue stick. I heat up the bed with taped mirror then put a quick 1 layer of glue stick on the warm bed. That will last me a week or two.

I'm having some issues with my printer now so I still haven't had the chance to print any of your models yet Serin but, they are awesome. Keep it up.

Re: Halo armament prints

null@example.com (Serin) — Thu, 01 May 2014 07:13:51 +0000

billchurch wrote:

Beautiful!
I was trying to print a Halo pistol early last week but she started pulling on the far corners. Need to work on that though.

Excellent! Not the warping... But the attempting I wish you good luck comrade!
I'm sure the helpful folks here would be more than we willing to offer some advice for fixing warping issues.
My advice? If it's ABS set the bed at 110 and use lots of acetone/abs goop.

Re: Halo armament prints

null@example.com (billchurch) — Mon, 28 Apr 2014 14:56:20 +0000

Beautiful!

I was trying to print a Halo pistol early last week but she started pulling on the far corners. Need to work on that though.

Re: Halo armament prints

null@example.com (Serin) — Mon, 21 Apr 2014 12:04:09 +0000

Finally done.... With the LightRifle that is.

Now begins the annoying process of applying bog to fill the gaps and smooth out the z-wobble result.

And next up.... A Reach Mark V(B) brain bucket.

I've attached the helmet files to make up for the fact that I shant be sharing the files for the LR.