https://www.soliforum.com/topic/5657/need-help-with-selecting-a-glue-for-abs-to-neodymium-magnet/ Sat, 22 Feb 2014 21:53:00 +0000 PunBB https://www.soliforum.com/post/50571/#p50571 I've used Hobby Haven's wood/metal model glue with great success before on 1*1/2*1/8" neodymium magnets.  It still seems to be holding fine.

]]> Sat, 22 Feb 2014 21:53:00 +0000 https://www.soliforum.com/post/50571/#p50571 https://www.soliforum.com/post/50547/#p50547 I used JBWeld epoxy because I had some (who cares if it is overkill :-).

]]> Sat, 22 Feb 2014 15:46:27 +0000 https://www.soliforum.com/post/50547/#p50547 https://www.soliforum.com/post/50524/#p50524 Epoxy seems overkill, it's stronger than the ABS. cyanoacrylic "superglue"s have been my favorite.

]]> Sat, 22 Feb 2014 06:24:46 +0000 https://www.soliforum.com/post/50524/#p50524 https://www.soliforum.com/post/50519/#p50519 I have used two part epoxies and also E6000(shoe goo)I usually rough up the surface of the magnet I am putting the glue on, have never had either fail yet

]]> Sat, 22 Feb 2014 05:37:05 +0000 https://www.soliforum.com/post/50519/#p50519 https://www.soliforum.com/post/50514/#p50514 I used two-part epoxy to hold the magnets in my dial-indicator mounting bracket.  Worked great.

]]> Sat, 22 Feb 2014 04:45:47 +0000 https://www.soliforum.com/post/50514/#p50514 https://www.soliforum.com/post/50510/#p50510 Want to permanently fix Neodymium magnets to ABS. I think they are plated with nickel on the outside if I remember correctly. I am currently using Gorilla Glue (the "super glue" variety) and it seems to work pretty good but wondering if there's anything else out there that is better. They are 4mm diameter magnets so very small.

]]> Sat, 22 Feb 2014 04:37:04 +0000 https://www.soliforum.com/post/50510/#p50510