https://www.soliforum.com/topic/5582/adjusted-extruding-rate-now-infill-too-low/ Thu, 20 Feb 2014 17:05:29 +0000 PunBB https://www.soliforum.com/post/50348/#p50348 The problem was that I was just printing too fast.

]]> Thu, 20 Feb 2014 17:05:29 +0000 https://www.soliforum.com/post/50348/#p50348 https://www.soliforum.com/post/50062/#p50062 how many top layers do you have ? you need at least 3 especially withh a lower infill percentage. and combine infill every 1 layers

]]> Tue, 18 Feb 2014 03:00:50 +0000 https://www.soliforum.com/post/50062/#p50062 https://www.soliforum.com/post/49910/#p49910 Hey, I just posted a question regarding my problems with the too high extrusion rate and I adjusted it.
Now walls are nice, but I have problems with overhangs and Top solid Infill. Looks like there's not enough plastic coming out for the infill. I attached some photos to show the printing results.
David

]]> Sun, 16 Feb 2014 14:27:48 +0000 https://www.soliforum.com/post/49910/#p49910