It calibrated as a tight 1.75mm, .89 extrusion multiplier, and running at 190 degrees C. My usual filaments run at 195 to 200. I've had no problems with the couple items I've printed, have swapped between it and other various ABS filaments, and have had no clogs, bubbles, or problems of any kind. It looks very smooth and dull black.

It's encouraging, as I've always stayed away from black due to the variety of problems that others have reported across the vendors.

Please excuse the dust, etc. on the print photo...I'm just in the midst of cleaning it for finishing.

So I've been printing with the Orange, it is working very well, adhering to layers, no popping sounds from the extruder during printing, so no bubbles.  I can't find my micrometer so I haven't got it 100% calibrated, seems in it's current state of calibration +10% seems to be the sweet spot for everything.  All in all, looks to be a good product. 

The price is high, 1) being in USD, with the current CDN dollar being not good and not getting better any time soon...  It strikes me that being a Canadian store it should be in CDN bucks.  2) The price is above average, even with the free shipping, standard seems to be $35 USD with free shipping. 

The service was very good, but there are rare moments when I need filament that quickly.  I will order from this vendor again.

Andrew

Mine (to the US) seems to be stuck somewhere also.

I got a note this afternoon from the supplier (before I had a chance to even look into it) that indicated he had opened an inquiry with the Canadian Postal Service because he had noticed that mine had not been delivered yet. Their initial guess was that it was stuck in Customs, but they are checking.

It's very heartening in these days to get a note like that from a supplier without having complained first. Big Plus.

UPDATE 2/1/14..got my delivery of black today in upstate NY, all vacuum packed, etc. At the discounted price, I decided I would finally try black.  Haven't done anything with it yet.

I got a note this afternoon from the supplier (before I had a chance to even look into it) that indicated he had opened an inquiry with the Canadian Postal Service because he had noticed that mine had not been delivered yet. Their initial guess was that it was stuck in Customs, but they are checking.

It's very heartening in these days to get a note like that from a supplier without having complained first. Big Plus.

Anyone that ordered from the US have any input? Does it get stuck in customs for a while? Not in a major hurry just wondering if something got messed up.

This runs as good as what I use for my standard for filament, which is zentoolworks. Its good stuff. While intro price is a great deal, you will have to be the jugde whether $40 is is acceptable.

EDIT: I am also in the USA. No problems with shipping.

It probably does help I live ~ 20km away from them!

Hopefully report on the results later today, I'm so very disapointed with the Solidoodle natural filiament, it's always making popping sounds and just seems brittle before and after it goes into the extruder.  The Solidoodle black was fine.

Andrew