<![CDATA[SoliForum - 3D Printing Community — Assembly pic of thrust plate area]]> https://www.soliforum.com/topic/5067/assembly-pic-of-thrust-plate-area/ Sun, 05 Jan 2014 04:40:09 +0000 PunBB <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45818/#p45818 Function over form. It can be a beautiful thing...some of the time. Thanks Tim.

]]> Sun, 05 Jan 2014 04:40:09 +0000 https://www.soliforum.com/post/45818/#p45818 <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45811/#p45811 You got it!

I need to get shorter bolts, but I ordered 1000. :-/

]]> Sun, 05 Jan 2014 04:13:52 +0000 https://www.soliforum.com/post/45811/#p45811 <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45803/#p45803 Here it is Tim.

]]> Sun, 05 Jan 2014 03:38:01 +0000 https://www.soliforum.com/post/45803/#p45803 <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45801/#p45801 Upload a picture of what you ended up with and I'll tell you if its right.

]]> Sun, 05 Jan 2014 03:33:17 +0000 https://www.soliforum.com/post/45801/#p45801 <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45789/#p45789 Thanks Tim.

]]> Sun, 05 Jan 2014 01:16:54 +0000 https://www.soliforum.com/post/45789/#p45789 <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45785/#p45785 Nope! Definitely not. Eight are included because sometimes the bolts in this batch don't have enough thread, so you can use the spacers between the nut and washer to move the nut out to where there's thread.

]]> Sun, 05 Jan 2014 00:01:30 +0000 https://www.soliforum.com/post/45785/#p45785 <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45783/#p45783 Double up the nylon spacers?

]]> Sat, 04 Jan 2014 23:57:24 +0000 https://www.soliforum.com/post/45783/#p45783 <![CDATA[Re: Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45778/#p45778 Not at the moment, but from motor side to nozzle side:

motor side - flange, white plate, thrust bearing (with both races), shaft collar, 10mm washer if included.

Same as the cad model on steps 9-12, but instead of one big block, there's the laser cut plate and the flange. Flat side of the flange faces the plate.

]]> Sat, 04 Jan 2014 22:15:46 +0000 https://www.soliforum.com/post/45778/#p45778 <![CDATA[Assembly pic of thrust plate area]]> https://www.soliforum.com/post/45769/#p45769 Tim, are you able to post a cad model or pic showing the thrust plate area? I've got the white plate and steel flange version. Thank you!

]]> Sat, 04 Jan 2014 21:37:26 +0000 https://www.soliforum.com/post/45769/#p45769