SoliForum - 3D Printing Community — Guide bars printable

Re: Guide bars printable

null@example.com (elmoret) — Fri, 03 Jan 2014 17:31:05 +0000

inches = 25.4 mm. You can scale by that factor if needed. STLs are unitless, the units are assumed by the slicing software.

Re: Guide bars printable

null@example.com (neil.thorpe) — Fri, 03 Jan 2014 08:46:44 +0000

Thanks, this had the same issue, so opened in tinkercad and found the reason, its very very small, so ive increased its size a good few hundred percent.

Thanks again

Neil

Re: Guide bars printable

null@example.com (OSPrinting) — Thu, 02 Jan 2014 22:19:02 +0000

This should work.
https://www.dropbox.com/s/s35tn9lee0wvr … %20Bar.stl

Re: Guide bars printable

null@example.com (neil.thorpe) — Thu, 02 Jan 2014 18:05:40 +0000

Would you have the guide bars somewhere else, the actual bars appear to be a circle thats only 1 layer in height when put through either skienforge or pronterface. the base V2 works fine.

Re: Guide bars printable

null@example.com (neil.thorpe) — Thu, 02 Jan 2014 17:04:59 +0000

Cheers thats the one im after

Re: Guide bars printable

null@example.com (OSPrinting) — Thu, 02 Jan 2014 15:04:18 +0000

I'm not sure which type of enclosure you are using but I know the parts for the one we designed can be found on thingiverse.
http://www.thingiverse.com/thing:105877

Hope that helps.

Guide bars printable

null@example.com (neil.thorpe) — Thu, 02 Jan 2014 11:39:03 +0000

Hi, ive just about completed everything and was wondering if anyone has the 3d files for the guide bars and the bits to hold on the holes of the fan so I can print and add to my filastruder enclosure.

Thanks

Neil