SoliForum - 3D Printing Community — question on bridges

Re: question on bridges

null@example.com (Photog) — Thu, 16 Jan 2014 07:56:06 +0000

Bump..just want to hear others thoughts

Re: question on bridges

null@example.com (n2ri) — Fri, 03 Jan 2014 00:44:19 +0000

I had to set mine at 10mm.
and why dont it use bridge setting on most short bridges say under 20mm long?

Re: question on bridges

null@example.com (Photog) — Wed, 18 Dec 2013 04:31:28 +0000

satman49 wrote:

I just printed that stl , came out pretty well.Had to do a bit of clean up.I used 55mm for bridges.

55mm/s it won't anchor. maybe 200C for temp is not enough

Re: question on bridges

null@example.com (satman49) — Mon, 16 Dec 2013 01:53:29 +0000

I just printed that stl , came out pretty well.Had to do a bit of clean up.I used 55mm for bridges.

question on bridges

null@example.com (Photog) — Sun, 15 Dec 2013 11:59:09 +0000

Is it weird that I get my best bridges so far (on bridge torture test.stl) when it's bridging at 15mm/s ??

Everything I've heard says that faster is better for bridges, at least 60mm/s +. But when I use fast speed for bridging, it doesn't anchor the bridge strands in good enough and they snap off near the perimeters of where they are anchored to.