<![CDATA[SoliForum - 3D Printing Community — question about changing stepper drivers]]> https://www.soliforum.com/topic/4771/question-about-changing-stepper-drivers/ Fri, 06 Dec 2013 19:45:42 +0000 PunBB <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43461/#p43461 yes, you will need to change the steps per mm after changing either piece. The 1/16 -> 1/32 microstepping driver and 200 steps/rotation -> 400 steps/rotation motor will both require this if changed individually.

(current Extruder steps/mm) x 2 = new value

If changed at the same time it will be:

(current Extruder steps/mm) x 4 = new value

]]> Fri, 06 Dec 2013 19:45:42 +0000 https://www.soliforum.com/post/43461/#p43461 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43453/#p43453 Do I need to make the eeprom change if I just change the driver or if I change the motor and the driver?

]]> Fri, 06 Dec 2013 18:49:39 +0000 https://www.soliforum.com/post/43453/#p43453 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43439/#p43439 just an eeprom adjustment

]]> Fri, 06 Dec 2013 17:10:27 +0000 https://www.soliforum.com/post/43439/#p43439 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43434/#p43434 Great thanks! And is it just a simple eeprom steps/mm change? or is it more involved than that?

]]> Fri, 06 Dec 2013 16:58:32 +0000 https://www.soliforum.com/post/43434/#p43434 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43433/#p43433 I got mine here https://www.sparkfun.com/products/10846

The motor is too big to put a fan on but it seemed to do okay without one.

]]> Fri, 06 Dec 2013 16:24:37 +0000 https://www.soliforum.com/post/43433/#p43433 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43432/#p43432 Any recommended sources for the .9 stepper motor?

]]> Fri, 06 Dec 2013 16:10:02 +0000 https://www.soliforum.com/post/43432/#p43432 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43431/#p43431 yep. keep an eye out for sales on Geeetech.com

Every weekend they have sales on certain items. The DRV8825 is a common item for the sale and sells for about $5-6.

http://www.geeetech.com/stepstick-drv88 … p-652.html

As with most mods, make sure you have spares and keep your old drivers.

]]> Fri, 06 Dec 2013 16:08:50 +0000 https://www.soliforum.com/post/43431/#p43431 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43429/#p43429 Great, I think I will look at that then.  In followup will this work for my board? http://www.pololu.com/product/2133

]]> Fri, 06 Dec 2013 16:03:00 +0000 https://www.soliforum.com/post/43429/#p43429 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43418/#p43418 Your A4988 stepper drivers are capable of 1/16 microsteps. This should be fine for X Y Z movements. The DRV8825 or SD8825 drivers are capable of 1/32 microsteps which is particularly helpful with the Extruder. If you are planning on swapping any out then start with the extruder (E).

Moire is caused by the extruder but you will notice moire more when you get rid of the Z wobble.

There is no need to swap out motors. If you are really really bored and just want to change things just because then you can swap you extruder motor out for a .9 degree stepper motor instead of the 1.8 you have now. That and the driver will each double your steps/mm for the extruder.

]]> Fri, 06 Dec 2013 15:13:04 +0000 https://www.soliforum.com/post/43418/#p43418 <![CDATA[Re: question about changing stepper drivers]]> https://www.soliforum.com/post/43417/#p43417 E3D causes some moire, The Z rod shouldn't effect moire, only banding I believe. I just changed the extruder stepper. Everything else should be Ok.

From what I gather changing anything other than the extruder stepper is almost unnoticeable. Yes, you might gain some accuracy but the other drive components are lacking to make up for it(belts and pulley slop.).

It definitely wont hurt.

]]> Fri, 06 Dec 2013 15:08:45 +0000 https://www.soliforum.com/post/43417/#p43417 <![CDATA[question about changing stepper drivers]]> https://www.soliforum.com/post/43415/#p43415 I have an older version of the SD2 with the wood Z platform and resistor heated bed.  I believe that my SD2 motherboard has the separate stepper drivers.  Could someone explain the benefit of switching out the drivers?  I'm planning on doing alot of mods to my printer in the coming weeks.  I'm going to change the Z rod to a 5mm.  I'm installing an aluminum platform to replace the wood.   Also I'm installing a heat pad to replace the resistor on the bed.  I have an E3D hot end ordered and I will be replacing the solidoodle one.  I also have a 300W power supply I will be replacing the original with. 

So I'm wondering if I should also replace the stepper drivers.  I've heard I think that you can get a moire pattern when you go to the 5mm or 3mm Z rod and changing the driver can help.  Will I need to change the stepper motors also?  In any case here is the motherboard I have.

]]> Fri, 06 Dec 2013 15:01:43 +0000 https://www.soliforum.com/post/43415/#p43415