<![CDATA[SoliForum - 3D Printing Community — Printed parts not fitting]]> https://www.soliforum.com/topic/4762/printed-parts-not-fitting/ Fri, 06 Dec 2013 06:41:59 +0000 PunBB <![CDATA[Re: Printed parts not fitting]]> https://www.soliforum.com/post/43390/#p43390 http://www.thingiverse.com/thing:84795

This is a pretty good test to get your printer making objects that come out the size that you would expect.

]]> Fri, 06 Dec 2013 06:41:59 +0000 https://www.soliforum.com/post/43390/#p43390 <![CDATA[Re: Printed parts not fitting]]> https://www.soliforum.com/post/43372/#p43372 It is adjustable within the filament section of Slic3r as an "extrusion multiplier".  The other option (definately do this one if you haven't yet!) is to calibrate your extruder steps per millimeter.  Instructions can be found on the wiki.

]]> Fri, 06 Dec 2013 01:01:55 +0000 https://www.soliforum.com/post/43372/#p43372 <![CDATA[Re: Printed parts not fitting]]> https://www.soliforum.com/post/43369/#p43369 Thanks for the reply. Is it the flow rate/speed in Slic3r that needs to be adjusted? Where/what would be the proper settings? Mine are pretty stock from what SD recommends. Reading up on some of the links, it looks like the extrusion multiplier in Slic3r needs to be adjusted. I'll try that first.

Thanks again.

]]> Fri, 06 Dec 2013 00:28:01 +0000 https://www.soliforum.com/post/43369/#p43369 <![CDATA[Re: Printed parts not fitting]]> https://www.soliforum.com/post/43364/#p43364 morty wrote:

I'm sure there is an easy explanation for this, but if I print a project that has parts that need to be fitted together perfectly (every project) I'm finding that they do not fit. I'm sure there is an explanation for this or I'm not doing something correctly, but it's driving me nuts. For example, if I print Lawsy's filament guide: thing:31317, the filament valve is just a bit too big to fit into the valve support. I'm finding this on every project I do. Is there a trick to scaling specific parts or a setting I'm not aware of to have these parts print correctly? Or is it simply something where you have to print it to get the scale correct the second time which seems silly.

Thanks,
Morty


You are likely over-extruding a bit which will cause the parts to be slightly to big.

]]> Thu, 05 Dec 2013 22:58:22 +0000 https://www.soliforum.com/post/43364/#p43364 <![CDATA[Printed parts not fitting]]> https://www.soliforum.com/post/43354/#p43354 I'm sure there is an easy explanation for this, but if I print a project that has parts that need to be fitted together perfectly (every project) I'm finding that they do not fit. I'm sure there is an explanation for this or I'm not doing something correctly, but it's driving me nuts. For example, if I print Lawsy's filament guide: thing:31317, the filament valve is just a bit too big to fit into the valve support. I'm finding this on every project I do. Is there a trick to scaling specific parts or a setting I'm not aware of to have these parts print correctly? Or is it simply something where you have to print it to get the scale correct the second time which seems silly.

Thanks,
Morty

]]> Thu, 05 Dec 2013 22:07:59 +0000 https://www.soliforum.com/post/43354/#p43354