<![CDATA[SoliForum - 3D Printing Community — robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/topic/4454/robohand-file-not-slicing-and-eiffel-tower-crashing-repetier/ Tue, 05 Nov 2013 11:56:53 +0000 PunBB <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40769/#p40769 Thanks lawsy,  I actually did that and just saw that the print came out successfully.

]]> Tue, 05 Nov 2013 11:56:53 +0000 https://www.soliforum.com/post/40769/#p40769 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40764/#p40764 The message is telling you there is an error with the STL file. It has nothing to do with your printer or computer.

http://cloud.netfabb.com

Upload the STL here and put in your email address. It will fix the file an send you a link to download.

]]> Tue, 05 Nov 2013 10:53:01 +0000 https://www.soliforum.com/post/40764/#p40764 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40754/#p40754 As a troubleshooting excercise I tried to re-slice an object that I have already printed and it sliced just fine.  So it seems that more complicated objects are failing to slice on my PC.  I have a 2010 based iMac which is an i5 dual core with 4GB ram installed.  Are these specs not powerful enough to slice more complicated objects?

]]> Tue, 05 Nov 2013 06:30:06 +0000 https://www.soliforum.com/post/40754/#p40754 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40753/#p40753 The only other thing as reference is a message from slic3r:

"19:10:43.058 : <Slic3r> Warning: The input file contains a hole near edge 31.244480,57.059753,0.000000-35.830261,59.645569,0.000003 (not manifold). You might want to repair it and retry, or to check the resulting G-code before printing anyway.
19:10:43.685 : <Slic3r> => Processing triangulated mesh
"

]]> Tue, 05 Nov 2013 06:15:07 +0000 https://www.soliforum.com/post/40753/#p40753 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40751/#p40751 Ok so now that I know it's possible I just need to figure out what is causing the issue locally to my pc.  There would be no point in trying if noone else could do it either right.

]]> Tue, 05 Nov 2013 05:48:56 +0000 https://www.soliforum.com/post/40751/#p40751 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40749/#p40749 I am running win8.1

]]> Tue, 05 Nov 2013 05:42:10 +0000 https://www.soliforum.com/post/40749/#p40749 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40748/#p40748 where do I change those settings?  I am new so forgive me ignorance on these things.

]]> Tue, 05 Nov 2013 05:41:43 +0000 https://www.soliforum.com/post/40748/#p40748 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40747/#p40747 I don't see anything about your slicer settings.... or the computer hardware/sw if you are slicing at high layer count it could be a problem also depending on what os you are running and the resources devoted to it and what is set for allocation to slicer.

EDIT: I have sliced the Eiffel tower as have others, while I haven't had the need to print the hand I have seen several people slice it just fine with slicer.

]]> Tue, 05 Nov 2013 05:40:37 +0000 https://www.soliforum.com/post/40747/#p40747 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40746/#p40746 i have slic3r 0.9.9-dev

]]> Tue, 05 Nov 2013 05:40:12 +0000 https://www.soliforum.com/post/40746/#p40746 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40745/#p40745 Could just be slic3r. What version are you using? Could try kisslicer or alternative.

]]> Tue, 05 Nov 2013 05:28:38 +0000 https://www.soliforum.com/post/40745/#p40745 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40743/#p40743 Can the solidoodle handle printing the eiffel tower and the robo hand?  If it is capable, what would cause it to have issues when trying to slice these files?

]]> Tue, 05 Nov 2013 05:09:49 +0000 https://www.soliforum.com/post/40743/#p40743 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40742/#p40742 No pictures since nothing printed
Files linked to (Thing # )
Links (search thing #)

settings:

Connection tab:

port: com3
baud rate: 250000
stop bits: 1
parity: none
transfer protocol: autodetect
receive cache size: 63
use ping-pong : unchecked

Printer tab:

travel feed rate: 4800
z-axis feed rate: 100
default extruder temp: 195
default heated bed temp: 90
number of extruder: 1
check extruder and bed temp: checked
remove m105 requests from log: checked
check every 3 seconds
park postion: x: 150, y: 150, z-min: 15
go to park: checked
disable extruder: checked
disable heated bed: unchecked
disable motors: checked
add to comp printing time: 8%

Printer Shape tab:

printer type: l_cartesian_printer
home x: max
home y: max
home z: min
x min: 0
y min: 0
x max: 159
y max: 150
bed left: 0
bed Front: 0
print area width: 159
print area depth: 150
print area height: 150

Advanced tab:

filter path and parameter:
run filter after every slice: unchecked

]]> Tue, 05 Nov 2013 05:08:44 +0000 https://www.soliforum.com/post/40742/#p40742 <![CDATA[Re: robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40737/#p40737 pictures,files, links, settings

You need to provide everyone with more information in order to help you.

]]> Tue, 05 Nov 2013 04:14:09 +0000 https://www.soliforum.com/post/40737/#p40737 <![CDATA[robohand file not slicing and eiffel tower crashing repetier]]> https://www.soliforum.com/post/40733/#p40733 Hey guys,

I just got my solidoodle 2 and have successfully printed twelve items thus far including a mayan calendar scaled to 2x that I printed this morning and then two other items as well.  I just tried to do an eiffel tower (thing:124990) and it crashed while being sliced and will not complete.  I believe the error is related to running out of memory.

Also I just finished trying to do the robohand bridges and it tried to create the slices for 80 minutes and the project ran for 2 seconds and said it was completed.

What could be causing this?  I really would like to be able to print these items so I'm going to keep trying but if anyone has a solution I would appreciate it.

]]> Tue, 05 Nov 2013 03:37:48 +0000 https://www.soliforum.com/post/40733/#p40733