SoliForum - 3D Printing Community — Avoid crossing parameters

Re: Avoid crossing parameters

null@example.com (pretenda) — Mon, 12 Nov 2012 23:17:25 +0000

Ill give 195 a shot and see how it goes. Thanks for the tips everyone.

Re: Avoid crossing parameters

null@example.com (IanJohnson) — Mon, 12 Nov 2012 22:10:02 +0000

195 still works fine, and it will extrude at 190, though the layers might not bond as well.

Re: Avoid crossing parameters

null@example.com (pretenda) — Mon, 12 Nov 2012 20:40:44 +0000

I'm away from home today, when I get back ill try post a photo.

I'm printing at 200. What can I go down to safely?

Re: Avoid crossing parameters

null@example.com (IanJohnson) — Mon, 12 Nov 2012 16:50:12 +0000

What temp are you printing at? Going a little cooler might help reduce oozing.

Re: Avoid crossing parameters

null@example.com (cmetzel) — Mon, 12 Nov 2012 16:11:05 +0000

Can you post a picture of the slic3r issue?

Re: Avoid crossing parameters

null@example.com (pretenda) — Mon, 12 Nov 2012 12:22:44 +0000

Nothing on this? I'm still having the same issue. Ive fixed my retraction settings but still get the same issue.

Avoid crossing parameters

null@example.com (pretenda) — Fri, 02 Nov 2012 00:38:52 +0000

Hey all,

I have both slic3r and skeinforge set up, and am loving the speed of slic3r. One question though, slic3r seems to cross parameters on each layer which leaves slag every time it passes. Is there a way of telling it to avoid doing so? skeinforge doesnt seem to have the same issue printing the same object. To give you an idea of what I am printing, it is a box with four holes in it, which i plan on using as a mold. I am trying to avoid using skeinforge as im printing 1mm layers and dont particularly want to print the fill every layer.

Thanks in advance.