<![CDATA[SoliForum - 3D Printing Community — Hello from Cleveland!]]> https://www.soliforum.com/topic/4347/hello-from-cleveland/ Fri, 25 Oct 2013 05:05:05 +0000 PunBB <![CDATA[Re: Hello from Cleveland!]]> https://www.soliforum.com/post/39906/#p39906 Your welcome. Yes, I have had the best results with the glass see if you can get it 2mm thick 8x8 inches and all you do is buy a can of aqua net hair spray and spray some on the glass for best results.

]]> Fri, 25 Oct 2013 05:05:05 +0000 https://www.soliforum.com/post/39906/#p39906 <![CDATA[Re: Hello from Cleveland!]]> https://www.soliforum.com/post/39863/#p39863 Thanks for all of the info. I've read a lot of tips scattered about the internet but knowing where to start helps a lot.

Would it make sense to go directly to glass for the best results? I have a really good source right around the corner so it wouldn't take much effort.

]]> Thu, 24 Oct 2013 18:12:53 +0000 https://www.soliforum.com/post/39863/#p39863 <![CDATA[Re: Hello from Cleveland!]]> https://www.soliforum.com/post/39808/#p39808 Hello Bms85 here is a link to the soliwiki you can find out how to calibrate your machine, mods, etc. The first thing that you want to do set the z offset screw and do an extruder calibration. You should also print out Lawsys MK5 extruder it will make it much easier then the jigsaw extruder if you ever get a clogg. In addition try kapton tape or blue painters tape on the platform to get good prints if that dosent work you can add a piece of glass everything is on the soliwiki or if not you can search it on the forum. Hope this helps.

http://wiki.solidoodle.com/solidoodle-1

http://www.thingiverse.com/thing:115659

]]> Thu, 24 Oct 2013 03:27:16 +0000 https://www.soliforum.com/post/39808/#p39808 <![CDATA[Hello from Cleveland!]]> https://www.soliforum.com/post/39804/#p39804 Hello Everyone!

I'm a web developer in Cleveland area Ohio. I'm new to the forums and 3d Printing. I ordered A solidoodle 3 yesterday and am anxiously awaiting delivery.

I just wanted to say hi, Introduce myself and see if anyone has a recommended place to go for calibration instructions etc. From what I understand every printer on the market currently is going to need adjustments. Are there any can't live without resources anywhere I should be looking into?

]]> Thu, 24 Oct 2013 03:03:44 +0000 https://www.soliforum.com/post/39804/#p39804