<![CDATA[SoliForum - 3D Printing Community — Slic3er didn't like 0.40mm nozzle..]]> https://www.soliforum.com/topic/4100/slic3er-didnt-like-040mm-nozzle/ Tue, 01 Oct 2013 16:20:01 +0000 PunBB <![CDATA[Re: Slic3er didn't like 0.40mm nozzle..]]> https://www.soliforum.com/post/37795/#p37795 you will see the problem in plain light when i will post picture when i will be at home..

]]> Tue, 01 Oct 2013 16:20:01 +0000 https://www.soliforum.com/post/37795/#p37795 <![CDATA[Re: Slic3er didn't like 0.40mm nozzle..]]> https://www.soliforum.com/post/37791/#p37791 I have no problem with my 0.4mm nozzle and Slic3r...I don't fully follow your path of diagnosis.

]]> Tue, 01 Oct 2013 16:11:47 +0000 https://www.soliforum.com/post/37791/#p37791 <![CDATA[Slic3er didn't like 0.40mm nozzle..]]> https://www.soliforum.com/post/37782/#p37782 i work on a "Dr who" related sculpture... and i just passed 5 days to tear my hairs and find that Slic3er in the last version (0.9.10b)  didn't like the 0.4mm nozzle that you can find on the last version of solidoodle...


i just changed my nozzle from 0.35mm to 0.40mmm because of clogged extruder problem...

and i found last night that slic3er is doing strange things on small details...  Kisslicer has zero problem with the same model...

if i change the nozzle size in slic3er (0.4 to 0.35), the problem disapear...

just for your information.. if you do models with small details and a 0.40mm nozzle, you may have to "inflate" your design for corrected gcode path error of slic3r...

time to go back to 0.35mm nozzle...

pictures of the problem will follow..

]]> Tue, 01 Oct 2013 11:54:42 +0000 https://www.soliforum.com/post/37782/#p37782