<![CDATA[SoliForum - 3D Printing Community — PID out1 relay not providing enough power]]> https://www.soliforum.com/topic/4006/pid-out1-relay-not-providing-enough-power/ Sun, 29 Sep 2013 11:43:07 +0000 PunBB <![CDATA[Re: PID out1 relay not providing enough power]]> https://www.soliforum.com/post/37614/#p37614 elmoret wrote:

That sounds like the exact problem with the Mypin controllers. I see you bought that Beta unit as-is. I can sell you a replacement Sestos controller, you can source one locally, or you can attempt the fixes discussed in the thread you mentioned.

Inc ase others are searching for this in the future, the thread mentioned is:  http://www.soliforum.com/post/25817/#p25817

(just took me a while to find and whatever i put into the search brought me to this thread...)

]]> Sun, 29 Sep 2013 11:43:07 +0000 https://www.soliforum.com/post/37614/#p37614 <![CDATA[Re: PID out1 relay not providing enough power]]> https://www.soliforum.com/post/36991/#p36991 Great!

]]> Sun, 22 Sep 2013 12:52:20 +0000 https://www.soliforum.com/post/36991/#p36991 <![CDATA[Re: PID out1 relay not providing enough power]]> https://www.soliforum.com/post/36990/#p36990 Thanks a lot Tim, Indeed I checked the box and fixed it by adding plastic under the pins and soldering iron on the pins.
Did the same for AL1.

Have a good day smile

]]> Sun, 22 Sep 2013 12:51:04 +0000 https://www.soliforum.com/post/36990/#p36990 <![CDATA[Re: PID out1 relay not providing enough power]]> https://www.soliforum.com/post/36988/#p36988 That sounds like the exact problem with the Mypin controllers. I see you bought that Beta unit as-is. I can sell you a replacement Sestos controller, you can source one locally, or you can attempt the fixes discussed in the thread you mentioned.

]]> Sun, 22 Sep 2013 11:59:42 +0000 https://www.soliforum.com/post/36988/#p36988 <![CDATA[PID out1 relay not providing enough power]]> https://www.soliforum.com/post/36984/#p36984 Hi everyone,

I have a small issue with my PID out1 autoswitch, I tried several days unsuccessfully and looked for similar posts on the forum.

I have a MYPIN PID temperature controller. (I saw that there was a malfunction with some of them, but mine is not behaving the same way).

- the out1 switch is normally triggered, it can for example make the fan spin, but it is not providing enough power to heat the extruder (maximum 35oC, and super slow to increase temperature)
- the heater is working well if I plug it directly to the power, can heat up to 205oC
- I tried to modify the configuration for the out1 switch, I tried with Relay (020), SSR/SCR (001) and 4-20mA (000), nothing working.

Some pictures (using out1 switch and then plugged directly to power) (Sorry cannot upload links on the forum, should be beside this message)

Here is the advanced configuration of mypin :

AL 1
180.0

AM 1
2

AL 2
900.0

AM 2
2

PuF
0.0

InP
K

P
0.20

I
15.00

d
3.75

oUd
HEAt

HYS
1.0

Ctl
020

trL
0.0

trH
100.0

bSL
tPu

C-F
C

LCK
000

Thanks for anyone who can help !
Brice

]]> Sun, 22 Sep 2013 07:41:24 +0000 https://www.soliforum.com/post/36984/#p36984