<![CDATA[SoliForum - 3D Printing Community — Really BAD owl]]> https://www.soliforum.com/topic/3453/really-bad-owl/ Sun, 11 Aug 2013 05:30:19 +0000 PunBB <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32551/#p32551 here we go this is re along the lines of what im expecting, much beter layers no gaps. .1 , 20% fill, print failed with an hour left to go. damnit.

]]> Sun, 11 Aug 2013 05:30:19 +0000 https://www.soliforum.com/post/32551/#p32551 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32238/#p32238 installes a well nut trying to see if there was any difference in my prints...

the owl on the left is befor the well nut the owl on the right is after

little more consistent but still little horizontal gaps on my perimeters

]]> Wed, 07 Aug 2013 20:53:59 +0000 https://www.soliforum.com/post/32238/#p32238 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32237/#p32237 It's a do it yourself mod, the community solutions are giving better results than the SD solution at the moment.  Try the slop nut solution first, it is simple and effective.  Don't chase perfection if you don't need it.  I have mine stock and it's perfectly fine for my use so I haven't done a thing to it.

]]> Wed, 07 Aug 2013 20:53:20 +0000 https://www.soliforum.com/post/32237/#p32237 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32150/#p32150 Honestly, even if they replace it, it will only be marginally better.  http://www.soliforum.com/post/31960/#p31960

They acknowledge that there are several issues causing banding. I think you best bet is to pick a fix from the forums and run with it. I have had wonderful success with my slop nut design using M5 threaded rod. I am sure M3 works well also.

]]> Wed, 07 Aug 2013 00:37:54 +0000 https://www.soliforum.com/post/32150/#p32150 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32148/#p32148 is the banding something i should bring to solidoodles attention? or is that pretty much a users problem? ive been planning to do either a ball screw or the fine threaded rod mod  so i guess just say f-it and bring on the mod

]]> Wed, 07 Aug 2013 00:33:12 +0000 https://www.soliforum.com/post/32148/#p32148 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32147/#p32147 What speed are you running that at? It would help to slow it down a little bit. Also, I know that you have some fairly severe banding. --> http://www.soliforum.com/topic/3434/torture-test-print/

I think the combination of the 2 is what you are seeing here

]]> Wed, 07 Aug 2013 00:08:45 +0000 https://www.soliforum.com/post/32147/#p32147 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32131/#p32131 much better still not perfect though what tweeks do I need to make ?

]]> Tue, 06 Aug 2013 22:38:41 +0000 https://www.soliforum.com/post/32131/#p32131 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32038/#p32038 yep i tried to print the yoda lite to at 40% scale.  i have a feeling its to fast and theres something else going on too i dont know what tho


UPDATE: my Z ofset was way off. brought it up re leveled gonna try the owl again

]]> Tue, 06 Aug 2013 03:57:11 +0000 https://www.soliforum.com/post/32038/#p32038 <![CDATA[Re: Really BAD owl]]> https://www.soliforum.com/post/32037/#p32037 Well I gotta say I have never seen the owl look like that.....


Is that the same slicer profile as your other print ?

]]> Tue, 06 Aug 2013 03:34:03 +0000 https://www.soliforum.com/post/32037/#p32037 <![CDATA[Really BAD owl]]> https://www.soliforum.com/post/32036/#p32036 so I tried to print an owl form thingiverse and it didn't come out so well

.3mm layer height,4 perimeters, perimeter speed 35 mm along small perimeters. sliced with slic3r

whats wrong here ?

other prints are okay
http://www.soliforum.com/misc.php?actio … mp;preview

]]> Tue, 06 Aug 2013 02:54:58 +0000 https://www.soliforum.com/post/32036/#p32036