<![CDATA[SoliForum - 3D Printing Community — Poor print quality on certain spot]]> https://www.soliforum.com/topic/3438/poor-print-quality-on-certain-spot/ Mon, 05 Aug 2013 01:17:46 +0000 PunBB <![CDATA[Re: Poor print quality on certain spot]]> https://www.soliforum.com/post/31901/#p31901 i get that same gap sometimes let me know what works for you ,Kucau

]]> Mon, 05 Aug 2013 01:17:46 +0000 https://www.soliforum.com/post/31901/#p31901 <![CDATA[Re: Poor print quality on certain spot]]> https://www.soliforum.com/post/31900/#p31900 Try either increasing or decreasing the extrusion width.  If the problem is happening just inside the external perimeter change the perimeter width, if it's happening farther in, change the default extrusion.

Slice, then check the generated code.

]]> Mon, 05 Aug 2013 00:51:37 +0000 https://www.soliforum.com/post/31900/#p31900 <![CDATA[Re: Poor print quality on certain spot]]> https://www.soliforum.com/post/31897/#p31897 ronsii wrote:

That gap is from the slicer, which slicer are you using?

built in Slic3r in Repetiter for Solidoodle... but why the gap is consistent even using other design? any suggestion . thanks

]]> Sun, 04 Aug 2013 23:52:21 +0000 https://www.soliforum.com/post/31897/#p31897 <![CDATA[Re: Poor print quality on certain spot]]> https://www.soliforum.com/post/31896/#p31896 That gap is from the slicer, which slicer are you using?

]]> Sun, 04 Aug 2013 23:49:31 +0000 https://www.soliforum.com/post/31896/#p31896 <![CDATA[Poor print quality on certain spot]]> https://www.soliforum.com/post/31894/#p31894 Hi ,

Im having prob with print quality on  certain spot. Have a look at the picture below , its a frame for Gopro Hero 3. First i thought it was design error as all frames i printed from the design having consistent quality issue on the same spot. So i downloaded another design from thingiverse and i keep on getting the same quality issue at the same spot. Any idea?

]]> Sun, 04 Aug 2013 23:42:24 +0000 https://www.soliforum.com/post/31894/#p31894