SoliForum - 3D Printing Community — Prints lift partially even after leveling the bed.

Re: Prints lift partially even after leveling the bed.

null@example.com (theman00011) — Sat, 27 Jul 2013 02:49:20 +0000

I haven't got my headed bed in the mail yet so I am actually using just the acrylic bed alone. I cleaned it with acetone a few days ago but that is it.

Re: Prints lift partially even after leveling the bed.

null@example.com (ronsii) — Sat, 27 Jul 2013 02:33:19 +0000

Have you cleaned the bed kapton with anything recently?

Prints lift partially even after leveling the bed.

null@example.com (theman00011) — Fri, 26 Jul 2013 21:36:43 +0000

So what happened was I moved my SD2 to another area and I think it might have got unleveled while moving. No problem right? Well, that is what I thought but after leveling the bed with a card and double checking it, I did a test print and it was coming up. So I adjusted the Z tab counter-clockwise until it started sticking. But it only stuck on one side even after re-leveling. Any ideas as to how to fix this? It was working just fine until I moved it.