<![CDATA[SoliForum - 3D Printing Community — Switching between ABS<>PLA]]> https://www.soliforum.com/topic/308/switching-between-abspla/ PLA.]]> Wed, 17 Oct 2012 21:30:04 +0000 PunBB <![CDATA[Re: Switching between ABS<>PLA]]> https://www.soliforum.com/post/2456/#p2456 I imagine it would help if you cleaned the nozzle with some acetone. I've never tried it myself.

]]> Wed, 17 Oct 2012 21:30:04 +0000 https://www.soliforum.com/post/2456/#p2456 <![CDATA[Re: Switching between ABS<>PLA]]> https://www.soliforum.com/post/2318/#p2318 There was a recent thread about this at the RepRap forum - http://forums.reprap.org/read.php?1,158085

]]> Mon, 15 Oct 2012 17:29:59 +0000 https://www.soliforum.com/post/2318/#p2318 <![CDATA[Re: Switching between ABS<>PLA]]> https://www.soliforum.com/post/2307/#p2307 Yeah, I'd like to know too, I've clogged my nozzle switching back and forth.

]]> Mon, 15 Oct 2012 14:14:53 +0000 https://www.soliforum.com/post/2307/#p2307 <![CDATA[Switching between ABS<>PLA]]> https://www.soliforum.com/post/2293/#p2293 Hi,

Is there some good advice on how to switch from ABS to PLA

My main concern is clogging up the hotend-nozzle since I heard that the filaments don't mix well (in the extruder)
Also, what's the suggested setting in terms of temperature for the (Hotend / Bed) or is this material specific?

Thanks
//Martin

]]> Mon, 15 Oct 2012 10:56:21 +0000 https://www.soliforum.com/post/2293/#p2293