https://www.soliforum.com/topic/3068/solidoodle-crashing-past-axis/ Fri, 05 Jul 2013 05:12:02 +0000 PunBB https://www.soliforum.com/post/29072/#p29072 I would do a test by homing all then inching the manual controls up to the spot where the stepper stalls(look at the number on screen)and then lower the axis area number to that minus 1-2, because of the tolerances of how the SD homes sometimes it only takes a milimeter or two to be too far off in one direction to cause problems.

]]> Fri, 05 Jul 2013 05:12:02 +0000 https://www.soliforum.com/post/29072/#p29072 https://www.soliforum.com/post/29052/#p29052 I currently have a solidoodle 2

]]> Fri, 05 Jul 2013 00:02:28 +0000 https://www.soliforum.com/post/29052/#p29052 https://www.soliforum.com/post/29050/#p29050 If you have a Solidoodle 3 then those numbers are wrong.  Add 50 to each of them, leaving height at around 194 (I believe).

]]> Thu, 04 Jul 2013 23:44:16 +0000 https://www.soliforum.com/post/29050/#p29050 https://www.soliforum.com/post/29046/#p29046 http://imageshack.us/photo/my-images/706/ied5.png/
Thats what it looks likes

]]> Thu, 04 Jul 2013 23:03:20 +0000 https://www.soliforum.com/post/29046/#p29046 https://www.soliforum.com/post/29030/#p29030 What software are you using to print?  If it's Repetier-Host there is a "Printer Settings" tab that should have within in that a "Printer Shape" tab.  What does that dialog box look like?

]]> Thu, 04 Jul 2013 20:33:02 +0000 https://www.soliforum.com/post/29030/#p29030 https://www.soliforum.com/post/29029/#p29029 I have had my printer for 2 days but have not been able to have one successful print because my solidoodle keeps trying to print off the front of the bed. I make sure I have pressed the home button before i start a print, that the object has been centered, and I followed instructions online on what settings my printer should be at.
Help!

]]> Thu, 04 Jul 2013 20:27:34 +0000 https://www.soliforum.com/post/29029/#p29029