<![CDATA[SoliForum - 3D Printing Community — Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/topic/3050/printer-doesnt-seem-to-know-the-location-of-the-printbed/ Mon, 08 Jul 2013 15:54:51 +0000 PunBB <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29339/#p29339 http://www.soliforum.com/topic/3098/gui … board-wip/ for reference to details on new firmware builds...

still lacks the crucial upload details - but I can't help there as yet, don't know the bootloader and I dont have my Spuds boards yet...

]]> Mon, 08 Jul 2013 15:54:51 +0000 https://www.soliforum.com/post/29339/#p29339 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29337/#p29337 Also, grab the right firmware. You probably have the new main board. The old firmware may not be compatible with the new board. (Just guessing since I have the old board)

]]> Mon, 08 Jul 2013 15:50:03 +0000 https://www.soliforum.com/post/29337/#p29337 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29199/#p29199 Form your original post it sounds like the limit switches may not be working correctly, make sure they are plugged in on the mainboard and in the correct locations.. here is a pic of how they should look(lower right side ZYX plugs):
http://www.solidoodle.com/wp-content/uploads/2013/06/boardcover.jpg

If these are correct then check to see if the switches are indeed being activated easily by the movement of the printer, there have been cases where the shims had to be installed to make the switch trip sooner.

]]> Sat, 06 Jul 2013 15:26:46 +0000 https://www.soliforum.com/post/29199/#p29199 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29195/#p29195 Yeah, I accidentally had SD2 selected there but I do infact have SD3.  As for printer type, I have no idea what one I should be selecting, and so left as default.  The max numbers were 150 or so as default I believe, but I changed them to 200 to see if that worked.

]]> Sat, 06 Jul 2013 14:24:20 +0000 https://www.soliforum.com/post/29195/#p29195 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29192/#p29192 Correct me if I'm wrong, but that screenshot says at the top"Solidoodle 2".  If that's the case, shouldn't the max numbers be 150?

I understand that the o/p said "3rd gen".  Maybe I've missed something...

EDIT : also, should the printer type be "Classic with dump area"?  Or is "Cartesian" what the setting used to be in older versions of the s/w?

Matt

]]> Sat, 06 Jul 2013 13:29:56 +0000 https://www.soliforum.com/post/29192/#p29192 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29189/#p29189 When RH connects to printer, it should dump a bunch of info, somewhere in there is the firmware version string (has a date/version, and authors). What does that say?

]]> Sat, 06 Jul 2013 11:28:23 +0000 https://www.soliforum.com/post/29189/#p29189 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29188/#p29188 I've flashed the firmware as per the Wiki link.  Still not sure what I'm doing with dictating the dimensions of the print bed, and with the values I showed in the image I posted, I can't do anything.  Which values should I have been changing?

]]> Sat, 06 Jul 2013 10:09:42 +0000 https://www.soliforum.com/post/29188/#p29188 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29187/#p29187 It arrived a couple of days ago, bought directly from Solidoodle.  It's an SD3, but I get cryptic errors if I use the SD3 settings sometimes so I've been using a lot of SD2 ones.  I'll drop support a message I guess, thanks for the help

]]> Sat, 06 Jul 2013 09:46:07 +0000 https://www.soliforum.com/post/29187/#p29187 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29186/#p29186 aufhocker wrote:

Explain it to me as if I'm an idiot (hint: I am) please

When did you pick up the printer ? You're description sounds like the older broken firmware... but you said its an SD3 so now I'm not so sure.... ?

Is this using the 'new' motherboard or the 'old' motherboard ?

What has Solidoodle Support had to say ? If its a new printer - might be just easier to open a case with them...

If it is the firmware issue, and you have the older motherboard, then http://www.soliwiki.com/Updating_Solidoodle_Firmware should have all the details you need...

]]> Sat, 06 Jul 2013 09:35:01 +0000 https://www.soliforum.com/post/29186/#p29186 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29185/#p29185 Explain it to me as if I'm an idiot (hint: I am) please

]]> Sat, 06 Jul 2013 09:33:37 +0000 https://www.soliforum.com/post/29185/#p29185 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/29182/#p29182 I really don't get what you're trying to tell me to do sad

Here's my current settings.  Hitting X home results in it trying to go off of the edge, and Y home does nothing attempting to manually move Y does nothing)

]]> Sat, 06 Jul 2013 09:25:32 +0000 https://www.soliforum.com/post/29182/#p29182 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/28921/#p28921 I'm not home right now and I don't remember what my settings are for the max.  The x is supposed to be off the bed when it is at home.  and the Y is supposed to be all the way back.  When x and y are at home the extruder should be in the back right corner when looking at the front of the machine.

In the printer tab of RH 85b (the solidoodle packaged version) there should be a printer shape tab to define the travel distance of the axis.  Use the dimensions I posted above.

In another spot, possibly another tab, there is a spot that is for the print surface.  The x and y should be 200 each.  And then there is information for the Dump area.

Sorry I cannot be more specific.  If you still cannot get it, I will try to look at my settings this evening when I get home from work.

What version of RH are you using?

]]> Wed, 03 Jul 2013 17:16:21 +0000 https://www.soliforum.com/post/28921/#p28921 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/28919/#p28919 I'm having a stupid day, which settings should I be changing?  I set the max of X to 100 and it's stopped trying to go off the edge when I hit X home now, but for Y home even a max of -100 sends it off the edge

]]> Wed, 03 Jul 2013 17:03:40 +0000 https://www.soliforum.com/post/28919/#p28919 <![CDATA[Re: Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/28913/#p28913 Yes, its in the printer settings of RH (top right corner).  Look in the Printer Shape tab and specify the dimensions.

X 209
Y & Z are 200

]]> Wed, 03 Jul 2013 16:38:44 +0000 https://www.soliforum.com/post/28913/#p28913 <![CDATA[Printer doesn't seem to know the location of the printbed]]> https://www.soliforum.com/post/28911/#p28911 When I start printing, the head moves to the corner of the printer (3rd gen) and makes an awful noise like it's trying to force beyond that point.  It will then move out a bit and commence printing.  In the software, the design is in the centre of the print bed, but it comes out in a corner.  Is there a way to specify to the printer the physical limitations of the print bed?

]]> Wed, 03 Jul 2013 16:31:20 +0000 https://www.soliforum.com/post/28911/#p28911